Just purchased a used rm 2310 dometic, it had a raised panel oak insert in door. I removed the panel, how would I install a 1/4 ply panel in the door? The plastic frame doesn't seem to come apart
Generally there is a plastic trim piece on the top of the refrigerator door which comes off with two screws. Then you can slip a new insert into the space. If it is too thin, you may need to make a backer piece to fill the extra space.
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.