I dropped the fresh water tank a few days ago and cut the blue wire that provides tank level readings. I reinstalled the tank and spliced the 2 wires back together. Now the red E on the panel stays illuminated without pressing any of the buttons, well, of course if ya press the black and grey the E also stays illuminated because they are empty. So how did I screw up this simple procedure, and ,yes, the are connected to the right wires.
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.