Reply
 
Thread Tools Search this Thread Display Modes
 
Old 04-13-2014, 05:31 PM   #1
2 Rivet Member
 
1990 29' Excella
Long Island , New York
Join Date: Oct 2013
Posts: 58
Tank Monitor Panel

I dropped the fresh water tank a few days ago and cut the blue wire that provides tank level readings. I reinstalled the tank and spliced the 2 wires back together. Now the red E on the panel stays illuminated without pressing any of the buttons, well, of course if ya press the black and grey the E also stays illuminated because they are empty. So how did I screw up this simple procedure, and ,yes, the are connected to the right wires.
__________________
Jeepjunk4 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help on removing tank level monitor panel Ditter Waste Systems, Tanks & Totes 1 02-18-2014 12:44 PM
New LP/BATT/TANK monitor panel. Roddzilla General Repair Forum 0 05-20-2013 12:44 PM
Does the Micropulse Monitor Panel Monitor LP? KJRitchie LP Gas, Piping, Tanks & Regulators 5 03-21-2013 03:20 PM
Tank level monitor suggestions for new black/gray tank mrsfixit Waste Systems, Tanks & Totes 5 06-28-2012 07:39 PM
Monitor Control Panel ZenRVer Sprinter and B-van Forum 2 08-11-2003 11:52 AM


Virginia Campgrounds

Reviews provided by




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 08:04 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.

Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.