|
This is from a '76 manual , but I think it's the same , it's for model 30.
1 cover floor area to protect from water damage
2 close valve on water inlet to toilet
3 remove water supply line from back of toilet
4 lift toilet seat ring and remove plastic plug to gain access to rear flange bolt
5 remove the rear flange bolt nut with a 12" extention
with a universal connecter and a 1/2" deep socket
6 remove front flange bolt nut by depressing both peddles on the slide valve and use a 1/2" box or open end wrench
7lift to remove
It's not too difficult , just tight spaces , good luck
|