|
12-15-2008, 12:03 PM
|
#1
|
Mini Rivet
1975 25' Tradewind
Holland
, Michigan
Join Date: Sep 2008
Posts: 273
|
Help identify water pump
Can anyone identify this water pump for me I would like to buy a rebuild kit for it.
The only numbers on it are 16148-0000 and someone has written on the bottom 68 Safari.
I have search long and hard for info on Peters & Russell, Par and Jabsco but can find nothing with the numbers 16148.
Your help is much appreciated.
|
|
|
12-15-2008, 12:10 PM
|
#2
|
Rivet Master
1972 25' Tradewind
North Vancouver
, British Columbia
Join Date: Feb 2006
Posts: 3,421
|
Maybe this will help?
__________________
Cameron & the Labradors, Kai & Samm
North Vancouver, BC
Live! Life's a banquet and most poor suckers are starving to death! - Mame Dennis
|
|
|
12-15-2008, 12:31 PM
|
#3
|
Retired.
Currently Looking...
.
, At Large
Join Date: Jun 2003
Posts: 21,276
|
What you have is a Par 4800 pump. I just checked with Inland Andy, and, if you can't find a repair kit, there is a new pump sitting on the shelf.
__________________
Meddle not in the affairs of dragons, for you are crunchy, and taste good with ketchup.
Terry
|
|
|
12-15-2008, 12:38 PM
|
#4
|
Rivet Master
1967 26' Overlander
Winston Salem
, North Carolina
Join Date: Oct 2007
Posts: 524
|
Here is the company where I purchased a repair kit for my 79 pump.
Jabsco
__________________
Greg
Winston Salem, NC
WBCCI 5218,
Corresponding Secretary Piedmont NC Unit 161,
1967 Overlander International.
1979 Avion 30ft rear bath
TV's 88 Chevy Suburban 454, 3:42, TH400
95 Cadillac FW Brougham, LT1,3:42, 7k tow pk.
|
|
|
12-15-2008, 02:23 PM
|
#5
|
New Member
Commercial Member
clearwater
, Florida
Join Date: Jun 2008
Posts: 2
|
I have attached 2 catalog pages from Depco Pump Co in Clearwater FL. After you have a chance to look these over give them a call (1-800-446-1656)and they can help you ID exactly which one you have. This is a great pump, been around for 30-40 years. It is totally re-buildable. Depco has all the parts. Best of luck
|
|
|
12-16-2008, 12:35 PM
|
#6
|
Mini Rivet
1975 25' Tradewind
Holland
, Michigan
Join Date: Sep 2008
Posts: 273
|
Put in a call to Depco Pump Co and had them read this thread, I was told:
"quote"
"Hi Bruce, sorry to say, but no parts are available for your pump. Its just too old. The replacement for it is a part number ja 36900-1000. We have it in stock for a price of $464.93. Shipping is extra. If you would like to order it, please call me at ext 238 and I will get it coming to you. Regards, George"
|
|
|
12-16-2008, 04:16 PM
|
#7
|
Rivet Master
1977 31' Sovereign
1963 26' Overlander
1989 34' Excella
Johnsburg
, Illinois
Join Date: Jul 2005
Posts: 2,944
|
My Jabco went bad also. I bought a Flotec for $70 from Campers World and it works much better (better flow and less noise) and it only took 15 minutes to install it. It takes less space and comes with adapters. Put in some flexible hose to and from the pump and it will be even quieter.
|
|
|
12-16-2008, 07:31 PM
|
#8
|
Rivet Master
1978 31' Excella 500
Venice
, California
Join Date: May 2006
Posts: 1,067
|
__________________
"Not all who are laundering are washed" say Bill & Heidi
'78 Excella 500,"The Silver Pullit". vacuum over hydraulic disc brakes, center bath, rear twin. '67 Travelall 1200 B 4X4 WBCCI 3737
|
|
|
12-17-2008, 05:00 AM
|
#9
|
Rivet Master
1973 27' Overlander
Loganville
, Georgia
Join Date: Nov 2007
Posts: 1,741
|
I bought a new pump from camping world also. I think they have one on sale for $49.00. It will pump 3.5 gallons per minute. That is all you need.
If you buy a new pump. screw it to a board that will fit in the area. and then screw the board into the flooring. You don't have much room to work with. I found it easier to screw the pump down before I put it under the sink. Then I took two screws that will cut through anything and screwd the half way into the board, placed the pump and finished screwing them in. Before I could not see what I was doing and I could not get pressure on my drill to get them to anchor, or could find the slots for the phillips. It is in and working great.
Lothlorian
__________________
Brian & Adrienne
|
|
|
12-17-2008, 08:05 AM
|
#10
|
Rivet Master
Airstream Dealer
Corona
, California
Join Date: Feb 2002
Posts: 16,497
|
Quote:
Originally Posted by bmklawt
Put in a call to Depco Pump Co and had them read this thread, I was told:
"quote"
"Hi Bruce, sorry to say, but no parts are available for your pump. Its just too old. The replacement for it is a part number ja 36900-1000. We have it in stock for a price of $464.93. Shipping is extra. If you would like to order it, please call me at ext 238 and I will get it coming to you. Regards, George"
|
Acceptable Jabsco pumps are available for far less than $400.00, especially the model you quoted.
Andy
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|