Originally Posted by Dupes
I have a cracked grey water tank and I'm going to attempt to pull it out to access the damage. I think it slides out the rear after removing the bumper and unhooking the plumbing/wiring. Does any one know where I can find a new tank if the tank FUBAR? Or does anyone have some good repair suggestions?
1974 31'soverign rear bath
Welcome to the forum. The tank can be removed by removing the belly pan in that area, removing the two bolts holding the rear support bar from under the tank, removing all the plumbing attached to it, and dropping it down while sliding it out toward the rear of the trailer.
A new tank would involve either finding a good used one, or a custom replacement. If you're getting a new custom one made, you can try to get one made a little larger than the factory 10 gallons.