I installed my fresh water tank today.
Why do these things take all day....?
I used a marine deck fill for the fresh tank water fill. It needs a 1-1/2" I.D. hose.
I ended up getting a poly hose with the right diameter but it does not curve very wall at all. So I ended up adding a couple of right angles which works, but there must be a better way. What kind of flexible non-kinking inlet hose should I be looking for?
On a side note, I was able to add two three-way selector vavles to the tank. One allows me to fill the tank from the city water inlet. The other connected the input of the pump to either the tank or a hose connection for winterizing. That turned out nicely.