and the work begins...

[jmcleod3]

Hello Everyone,
My Grandfather's 1968 28' Ambassador has become mine.

I've been doing some reading and purchased a used Cyclo on Craigslist.
What's next?
Stripper and compound, I guess.
I have a 40x50 pole barn that the trailer will sit during the winter, here in Michigan.
What is the easiest product to work with?

Thanks for all replies,

John

[mopariac]

The easiest product to work with is paying someone else to do it. I have only used Nuvite with the Cyclo so I can only say it did well for me, but was quite the chore. Some others will probably chime in on products they have used and then you can weigh your options. Good luck and congrads.

[dznf0g]

Nice trailer! Welcome BTW. After polishing, reseal EVERYTHING.

[SteSpot]

Originally Posted by dznf0g

Nice trailer! Welcome BTW. After polishing, reseal EVERYTHING.

Reseal it with what? thanks, p

[SteSpot]

Originally Posted by jmcleod3

Hello Everyone,
My Grandfather's 1968 28' Ambassador has become mine.

I've been doing some reading and purchased a used Cyclo on Craigslist.
What's next?
Stripper and compound, I guess.
I have a 40x50 pole barn that the trailer will sit during the winter, here in Michigan.
What is the easiest product to work with?

Thanks for all replies,

John

What a wonderful legacy. Our 1968 had been pretty much gutted on the inside so it is all new inside with the same floor plan and we think it is the perfect size for us.....enjoy and have fun....at least you know where your trailer has been.....ours has a silent history.......paula