Stovetop OCD Question
I removed the cooktop in order to replace the left hand cooktop cover bracket. I surveyed it beforehand, though not thoroughly enough. Once I put it back together and tested it (took two tries to get it right), I got the burners working properly, but I noticed two things that have my OCD going a bit. First, the cooktop is overhanging the piece that holds the valves by maybe a 1/4 in. Is that normal? I think, based on what I saw on a Colonial Airstream walkthrough, that it is. Second, I had a tiny bit of play on one corner, the front right, again maybe a 1/4 inch of movement up and down. It is definitely not like when pulling the cooktop and getting the bracket loose, but I didn't check to see if there was any play before hand. If someone could put there hands on there cooktop and tell me what you see and feel, I would greatly appreciate it.
|