|
11-11-2012, 01:42 PM
|
#1
|
2 Rivet Member
ARLINGTON
, Texas
Join Date: Sep 2008
Posts: 41
|
In need of entrance door help.
Hi everyone just got back from a trip (work) and went to check on the trailer, only to find someone had tried to break into the main door. They tried to get in through the key first, then tried to pry the complete lock plate out of the door as well as prying the door open between the jam and lock. If anyone has an idea as what would be better for the repair I would appreciate any input. A used door in good condition would be the easiest though not the cheapest or would a new outer skin be better, but i think the frame has been bent. I've included some pictures.
|
|
|
11-11-2012, 02:01 PM
|
#2
|
Rivet Master
1977 Argosy 24
Currently Looking...
Milltown
, Wisconsin
Join Date: Mar 2006
Posts: 1,087
|
A picture from a little farther away might be helpful. Sorry for your bad luck.
|
|
|
11-11-2012, 02:20 PM
|
#3
|
Rivet Master
1981 31' Excella II
New Market
, Alabama
Join Date: Sep 2011
Posts: 6,145
|
You can re-skin the door or make a patch that covers the damaged area. The patch can be decorative if you do it right. As for the frame, I think you can get it flat again and put a reinforced plate over the part they buggered up. This would also strengthen that area.
It might also be possible to weld extra material to the frame and grind it back to the original contour. Everything can be fixed. I expect the scratches and dents can be knocked out and sanded flat then buffed to get it back to original. A good body shop that does custom work could do it. There are professional restorers on here that might take that on.
Perry
|
|
|
11-11-2012, 02:54 PM
|
#4
|
4 Rivet Member
1972 25' Tradewind
Hopkins
, Minnesota
Join Date: Sep 2012
Posts: 458
|
Very sorry for your bad luck. I worry every day and night that someone is going to try to break into my '72 Trade Wind, as I work on her restoration. Have seriously considered electrifying the skin....so if some unauthorized scrapper touches her....ZAP!!!
|
|
|
11-11-2012, 03:19 PM
|
#5
|
Rivet Master
Airstream Dealer
Corona
, California
Join Date: Feb 2002
Posts: 16,497
|
Quote:
Originally Posted by HighFlying
Hi everyone just got back from a trip (work) and went to check on the trailer, only to find someone had tried to break into the main door. They tried to get in through the key first, then tried to pry the complete lock plate out of the door as well as prying the door open between the jam and lock. If anyone has an idea as what would be better for the repair I would appreciate any input. A used door in good condition would be the easiest though not the cheapest or would a new outer skin be better, but i think the frame has been bent. I've included some pictures.
|
A patch is always a patch.
Your Airstream is too new to use patches.
Call your insurance company.
That's what they are for.
Replace the complete dor, screen door and jamb.
That's the only assurance that the trailer will return to undamaged condition, and most importantly, without a patch.
The complete door assembly with freight and labor, will run about $ 3000.00.
Certainly far below the value of the trailer.
If your good at it, you could replace the door assembly, as it's not a big deal.
Andy
|
|
|
11-11-2012, 03:58 PM
|
#6
|
Rivet Master
2007 30' Classic
Oswego
, Illinois
Join Date: Jul 2010
Posts: 13,669
|
I am also sorry for your damage. These guys were not real bright were they. Tried the hard way to get in and gave up? Popping the door window or the front CS window would have got them in pretty quickly. I can't believe the noise level could have been much different.
__________________
-Rich-
"If the women don't find you handsome, they should at least find you handy." - Red Green
|
|
|
11-11-2012, 05:48 PM
|
#7
|
Rivet Master
1973 21' Globetrotter
Houston
, Texas
Join Date: Sep 2009
Posts: 3,320
|
Wow, for the cost that Andy estimates above, I think I would be talking to the insurance man. If you don't have full coverage, and have to tackle the repair yourself, it's not too tough to do a full reskin. I decided to replace the original latching mechanism on my '73, which, like your damage, would have required either a reskin or a marginal-at-best patch. I went with the reskin, and so far, it hasn't been too tough. I'm about half done. The replacement latch, that looks just like your original, I bought from PPL, and the aluminum sheet, I bout locally for under $100.
There is a sticky regarding repair of a sprung door. I am using that same approach (in terms of the jig to maintain the door shape) to reskin my door. Working pretty good so far.
|
|
|
11-12-2012, 02:17 AM
|
#8
|
Rivet Master
2005 19' Safari
GLENDALE
, AZ
Join Date: Aug 2004
Posts: 2,453
|
Sorry for your bad experience, but that's what insurance is for. I'd let them figure out the best way to repair it. You probably wouldn't try to repair your car door, so why take on this project. I'd let the professionals do the job right, so you can move past this.
By the way, did they get in?
|
|
|
11-13-2012, 10:25 AM
|
#9
|
2 Rivet Member
ARLINGTON
, Texas
Join Date: Sep 2008
Posts: 41
|
Thank everybody for the thoughts on the repair of my door. I'm having the door a d possible the jam replaced. As Andy and so others mention, a patch will look Like a patch, which I do not want. And for those who asked- no they did not get in. If they had broken a window out,it would have been no problem, but trying to pry the door open, the Airstream proved to tough and held strong.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|