|
HELP! 07 Dodge Dakota brake control wiring.
I have a 2007 Dodge Dakota 4x4 SLT extended cab truck. I installed a Tankosha controller, wired the plug kit to it, and plugged it in to the trailer brake port under the dash. However, when I got under the truck and looked at the wires inside the harness tube at the back of the truck, I could'nt find anything that matched the wires coming out of the back of the port nd going through the firewall. Where do I find a connection point? is there a block or terminated ends inside the harness protective tubing nearer the firewall?
The 7 point plug I installed on the truck is of the type that has a 4 pin flat adaptor and blk/blu/yel loose wires with a white ground loop.
|
Linear Mode
