Re: Break Away Brake Switch
Originally posted by davespann
How do you re-set this switch? I saw a thread about this switch causing the brakes to be locked up so I was wondering how to switch it off so to speak.
Dave Spann, Lake Charles, La.
The switch is activated by pulling the pin out of the housing by pulling on the cable. To deactivate it, simply replace the pin in the housing.
BTW: Do not pull the pin out with the umbilical cable connected to your tow vehicle. Depending on the brake control you have, it will very likely fry the controller.
John W. Irwin
2005 Classic 28 "Sabre-Dog III"
2013 Silverado 2500HD Duramax/Allison LTZ
WBCCI #9632, TAC TX-10