WANTED: T-Leg for Dinette Table

Cat · 08-07-2004, 12:29 AM

I NEED the T-Leg off of the dinette table that drops down to hold up both table tops, and slides out to use for the extension table. I need one that is exactly like the one I have...(On an 1981-1983 Excella 500) because I'm going to use it on the "Card-Table" on the curb side by the door.
It is a brassy/brown colour, in anodized aluminum. The only photo I have right now is of the hinge & one full-length that is awfully dark. I'll attach it, but it may not show up. If it looks like yours and has a T-foot to the leg...it probably is. I have one more photo but can't get the uploader to accept it.
If you think you have one like it, either write me here if you have one...or PM me, & I'll get a better photo from my 'digi'.
Thanx ........Cat

Cat · 08-07-2004, 12:51 AM

Here's the other photo...of the top of the leg. I guess I'd like to also have the hinge; but I don't need the slide-out feature. This leg will be modified to be removed manually---NOT folded up and stored within the table. (it would interfer with the new table fold-out leg.

I am also going to TRY to attach a photo of the new Card Table I will use this T-Leg on when I get it.

I hope someone will read this who has it, and will part with it.

.......Cat

Cat · 08-07-2004, 12:53 AM

The top post above HAD a photo attached to it....a ful-length shot of the T-Leg...if anyone wants to see it, I'll upload it again.

Cat · 08-13-2004, 04:48 PM

WANTED: T-Leg for Dinette Table

It's such a little thing...
but if you've made modifications, and have one you don't want...I want it---]please look around your old stuff. It's the leg that holds up the dining table; the one that drops down for one table & slides out to use for the extension table.
Even if you've found one..not yours...if you have one that looks like the photo below...let me know.

It's a brass colour, of anodized aluminum. JUST THE LEG.

One photo I've attached is pretty dark, but if it looks like yours ...it probably is; the other photo is the top of the leg where it joins the table underneath; I don't need the slide-out part, or even the hinge...
If you think you have one like it either write me here or PM me...

Thanx ........Cat
P.S. If you know a 'boneyard' where I might look (contact), let me know.