Garage Sale

wunderful62 · 10-17-2003, 11:05 AM

great idea and, come to think of it you dont need the original bathroom lamp receptacle and lens fgor your 61 bambi do you? i bought it at a swapmeet in calistoga a while back and would sell it for fifteen dollars.comes complete with bulb and socket and wiring and receptacle lens cover and screws, see what you started? wayne wunder w,b,c,c,i,/v.a.c.#1859 62 globetrotter/99 safari

moporolo · 10-17-2003, 01:02 PM

To keep this going:

I am in need of a complete main door lock assembly for a
1964 A/S. Anyone have one?

thenewkid64 · 10-17-2003, 01:07 PM

I am splitting off this thread for those of you who want to list items for sale or wanted. The thread will stay sticky so it is on top of this section of the forum. The posts above were moved from aother thread.

Time to go look in the garage for all the stuff collecting dust, list it here for free, and make some polishing money!

Jabba · 10-17-2003, 03:00 PM

Looking for one of the original TV antenna's for our '55. Have the mount on the trailer, just need the mast and aerial.

kechari · 11-30-2003, 10:15 PM

hi all,

was reading this thread and thought i should post this url, forgive me if not kosher to post in other threads, i'm not fully up on "forums"

here's a place you can go see all the parts with photos.

http://www.softshui.com/ontheroad/parts.html

michael

**flyfshr** · 11-30-2003, 10:41 PM

Looks like alot of useable stuff there Michael. Thanks for not hauling it to the dump. Someone around here will need some or most of it.

I am looking for an aluminum slider rail that is 72 1/2" long from the cabinets over the bed that the sliding doors go into. It has two grooves and is taller in the front than rear. It's an extruded single piece of aluminum. Thanks.

FF

kechari · 11-30-2003, 11:11 PM

hey FF,

we have a twin bed in the middle back bath unit. the cabinets over the twins are hinged at top, pull up and lock up type.

so, I don't think we have the slider channel.

michael

59toaster · 04-02-2004, 09:25 AM

Quote:

Originally Posted by kechari

hey FF,

we have a twin bed in the middle back bath unit. the cabinets over the twins are hinged at top, pull up and lock up type.

so, I don't think we have the slider channel.

michael

Do you sill have the cabinetry? I might be interested in some of it to use the wood to replace some pannels in our coach.

Where are you located?

Eric

**flyfshr** · 11-30-2003, 11:28 PM

You're right Michael. I looked through all of your pictures and your rig didn't have the sliding doors like mine. Too bad because I've been looking for over two years. Something will turn up. Hopefully soon.

FF

59toaster · 12-01-2003, 11:53 AM

I'm looking for Hehr front and rear windows for our 59. I think the size I need was used till about 63. On the bottom edge of the frame it will be stamped with the part number. I think I need 2142 and 2140 (I'll confirm size). The part number is the size opening it fits. so 2142=21"x42" measured the the first lip of the frame where it rivets to the body

I need complete assemblies including frame riveted to body if possible. I can work with broken glass. I would also like the rain gutters if available and strait.

Looking for a tall reefer 2 way and a LP water heater.

Navigator · 12-01-2003, 06:24 PM

I need Rear twins beds complete if possible. Also
Futon, wide as possible
Dinette
Gaucho
Curb side front wing window.
Exterior recepticle for a 30 Amp power cord.

Free to good home: Large curved mirror that mounts perpendicular to street side, from ceiling down.
Dick

**wahoonc** · 12-29-2003, 06:45 PM

Looking for the aluminum extrusion that fits on the "Front Travel Lounge Assembly" AS Part # 101255 It appears that this part is unique to the 1975 Sovereign International? I have called Colaws and a couple of other salvage yards, but no one seems to have this piece. It is the aluminum extrusion that mounts onto the slides at the front of the lounge, under the cushions.

Thanks

Aaron

overlander63 · 12-29-2003, 07:48 PM

I am looking for a spare wheel, 6 lug, 15". Steel preferred.
Terry
Found-Thanks

jlawrence · 12-29-2003, 09:00 PM

We just got back from our Christmas vacation in Santa Fe, NM. On the way out I spotted a short/old Airstream in TX just near the border in what appeared to be a junk yard. I pulled over to investigate and out came the junkyard dogs. ..no one around to ask about the trailer. ..so on the way home this weekend, I passed by again and met the junkyard proprieter. I asked if the unit was for sale in whole or parts. He said no but agreed to let me take a look.

It was a '63 Globetrotter in really bad shape. When he opened the door I saw actual junk piled inside from floor to ceiling - no way to go in. I noticed a few parts that appeared salvageable (tail lens, side markers, gas lamp, etc. but he wouldn't deal on any of it or even the trailer in whole). He appeared to love his junk and didn't want to part with it even for cash... One of the wedding cake tail lights was in perfect condition. Windows frames looked decent. I was pretty bummed he wouldn't sell me any parts.

He was pretty old and a little eccentric if you know what I mean, so I gave him some Christmas treats and headed home.

Happy New Year to all.

John.