Thread Tools Search this Thread Display Modes
 
Old 08-11-2003, 04:28 PM   #1
2 Rivet Member
 
Join Date: Aug 2002
Posts: 41
1967 tradewind parts for sale

gutted a 1967 airstream tradewind , parts for sale : stove (four burner ) , furnace , cusions ( i believe original ) shower and lavatory , made good attempt to save as much hardware as possible , stove hood vent ( works ) , cash
__________________

boardsander is offline  
Old 08-11-2003, 04:44 PM   #2
Rivet Master
 
drboyd's Avatar

 
1978 25' Tradewind
Metro Phoenix , Arizona
Join Date: Jun 2003
Posts: 1,444
Do you have...

....a front mount battery box?
__________________

drboyd is offline  
Old 08-11-2003, 08:04 PM   #3
2 Rivet Member
 
Join Date: Aug 2002
Posts: 41
1967 tradewind parts

sorry , no front mount battery box , 12v breaker box located port side just forward of shower wall and the only mount for battery was a plastic tray that the battery could sit in , thanks for responding
boardsander is offline  
Old 08-12-2003, 11:39 AM   #4
2 Rivet Member
 
Join Date: Aug 2003
Posts: 48
Images: 8
Any pictures of the shower/lavatory? Might fit a 66 Safari?? Need to replace some stuff in mine. Thanks!
stellablu is offline  
Old 08-12-2003, 11:54 AM   #5
3 Rivet Member
 
hhuber's Avatar
 
Join Date: Mar 2003
Posts: 206
Images: 8
Also intrested in shower/lav. Do you have the accordion door that goes in front of the bathroom. How about fridge?

Heidi
hhuber is offline  
Old 08-12-2003, 02:27 PM   #6
1 Rivet Member
 
1969 18' Caravel
Urbana , Illinois
Join Date: Sep 2002
Posts: 18
DO YOU HAVE A FRONT DINETTE?
DAN
sprusegoose is offline  
Old 08-12-2003, 03:44 PM   #7
2 Rivet Member
 
Join Date: Aug 2002
Posts: 41
1967 airstream tradewind parts

the dinnette is ( what was in tradewind upon purchase ) is a pedistal , and yes i do have it intact , shower and lavatory are still in trailer , i have not taken them out yet , the shower has a channel that shower curtain slides on and is still in trailer , no accordian door for shower , there was an accordian door kitchen to bed area but it was deterioriated beyond repair ,
boardsander is offline  
Old 08-12-2003, 03:49 PM   #8
2 Rivet Member
 
Join Date: Aug 2002
Posts: 41
67 refrig

yes i do have the frig for sale also , it is up on our porch running on elec. and it functions fine , but this one is not the original , this one stands around five feet high and has a freezzer , and makes ice quickly under three hours , dometic
boardsander is offline  
Old 08-12-2003, 10:39 PM   #9
3 Rivet Member
 
hhuber's Avatar
 
Join Date: Mar 2003
Posts: 206
Images: 8
Do you have a pic of the fridge? Also price and location.
Heidi
hhuber is offline  
Old 08-13-2003, 04:48 AM   #10
2 Rivet Member
 
Join Date: Aug 2002
Posts: 41
refrigerator

location , central texas , wimberley , between austin and san antonio , no pic yet , but i'll take one this p m and i can email to you direct if i have your address and if i am not too far away from you , thanks
boardsander is offline  
Old 08-24-2003, 09:07 AM   #11
Rivet Master
 
Tin Hut's Avatar
 
2005 28' International CCD
Pagosa Springs , Colorado
Join Date: Aug 2003
Posts: 801
Images: 1
may need some parts

I'm in the DFW area. Need a door for a '67 Tradewind. Also, can you email me any pics of the dinette. I may need some more parts as well. Thanks. Jim jfsjr@charter.net
Tin Hut is offline  
Old 08-24-2003, 07:23 PM   #12
2 Rivet Member
 
Join Date: Aug 2002
Posts: 41
1967 tradewind door

well , i need the door , i asume you want the one and only door enter and exit door to the trailer , the only way i can sell you the door is if you buy the whole trailer , and that might be , in addition i have all amber and red light marker light lens available , inland wants $21 something for each , i am completely redoing the entire inside , come one and all
boardsander is offline  
Old 08-25-2003, 02:13 PM   #13
New Member
 
Join Date: Aug 2003
Posts: 2
Do you have a gas valve for an Atwood water heater?
PossumTrotter is offline  
Old 08-25-2003, 07:38 PM   #14
2 Rivet Member
 
Join Date: Aug 2002
Posts: 41
attwood w/h gas valve

recently i took a prep class so i could learn what to study for for one of the state plumbing licenses here in texas , there was a film shown , it concerned a maintance man replaceing a valve a gas valve on a gas w/h with a used one , the result , the w/h blew up , i can not sell the gas valve on the attwood , always make sure your pr valve is no more than two years old and your w/h pressure relief valve is piped to the outside of your structure
boardsander is offline  
Old 09-06-2003, 03:38 PM   #15
2 Rivet Member
 
1960 18' Traveler
Glacier , Washington
Join Date: Jun 2003
Posts: 34
Hi, If you had a Princess stove/range (ours is a 640) do you have any oven racks and/or burner pieces? Thanks, stacia
60traveler is offline  
Old 09-07-2003, 08:19 PM   #16
2 Rivet Member
 
Join Date: Aug 2002
Posts: 41
stove parts for 67 tradewind

yes , and thank you , i do not know the model of stove , however i will check tomorrow and reply then , i believe the stove i took out was the original and it is fully intact and it is in store room all wrapped up
boardsander is offline  
Old 09-10-2003, 05:36 PM   #17
2 Rivet Member
 
bswaslien@aol.com's Avatar
 
Join Date: Jul 2003
Posts: 47
Images: 12
1967 A/S parts

Do you have the door for the hot water heater (outside), the local dealer lostr mine this week. I have a 1968 Amdassador, should be about the same. PJ
bswaslien@aol.com is offline  
Old 09-10-2003, 08:44 PM   #18
2 Rivet Member
 
Join Date: Aug 2002
Posts: 41
67' tradewind parts

yes i do have the water heater access door , all three parts of it and i reinstalled all three of themm this past weekend , i also have the one and only entrance door , the trailer is for sale as well as the parts that i was able to salvage , what is the water heater access door worth to you ? we can negotiate thanks
boardsander is offline  
Old 09-10-2003, 09:10 PM   #19
2 Rivet Member
 
bswaslien@aol.com's Avatar
 
Join Date: Jul 2003
Posts: 47
Images: 12
water heater door

Its hard to say since I can probably make a close substitute for not a great deal of money. Put a price on it, if I think its within
reason, I'll buy it, if not you can leave it with the rest of the salvage. PJ
.
bswaslien@aol.com is offline  
Old 09-14-2003, 01:33 PM   #20
New Member
 
Join Date: Jun 2002
Posts: 3
Door Latch

I need a Lock L 100 door latch. I have a 67 overlander. I would think the latch is the same. Can you help?
__________________

slowhand74 is offline  
 

Tags
1967


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 07:49 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.