Surburban Furnace Pilot Cap?

Darryl · 09-08-2003, 01:19 PM

I'm trying to locate the twist cap that goes on the burner assy on my Surburban NT30 Furnace in my 74 Arogsy28. Anyone have an old furnace with a good cap or 2? I really don't want to purchase a new furnace right now so a used one would be great.

Creampuff · 09-08-2003, 06:59 PM

If it's the same as a NT 22 a cap from a 1 gal metal can should fit.The original NT 22 had 2 caps-one with a mica window for flame adjustment,and a plain one for everyday use.

Darryl · 09-08-2003, 09:00 PM

That is what I have been told to use but I have had no luck finding a lid that will fit. Have you had any success using a metal gallon can cap?

Creampuff · 09-09-2003, 07:32 PM

I goofed - I tried a 1 gal lid and it is too large.There is a member who scrapped her furnace and maybe she still has one. Let me dig up the contact and PM you.

Creampuff · 09-10-2003, 10:55 PM

Can't seem to get back to the post on the Suburban burner cap needed for an NT 30.
I contacted the person who had a junker ,but unfortunately no cigar.
Try a post in the parts wanted section.If you can't find one ,my idea would be to take the 1 gal lid and line the threads with something like an epoxy stick. Build it up and wet it with saliva-put it on to cut the new threads and gently take it off before it sets. Good luck.