(but I smell a bunch of lobbyists at work here)
Your smeller needs calibration, tain't lobbying anything. I wouldn't use it. For whatever reason, it is not used as a industry standard.
Moving on to productive thoughts...Those of you that are warm, when was the last time you cleaned the condenser (outside finned material)? You may receive welcome benefits for doing such. It is important to spray the opposite direction than the airflow to correctly clean. Simple Green, 409 or such is a good degreaser to spray, then rinse with water hose, carefully ensuring that you do not bend over the fins with too much pressure or angle.
Good luck
|