Again the fan ...

[socool69]

yes again the fan ...

I read all comments about the fan and we do have the same complaint about noise ... but some question for me ....

we own a 25 rear bed and the microwave is over the refrigerator so no vent for the heat so we have a fan no choice

in the front bed the don't have this problem because a vent for the heat.

we want to change it off course but some question

we I want to buy a new one and need the spec from the old one but I can find it on the web ... too many model ... someone have it ? I have a picture if can help?

I know it's a 120x120 and very important to know cfm,amps and volt

I want to change it for a better one in cfm,amps and volt and noise ....



I discus with me friend a engineer he don't agree the ideal to put a switch!!! because the Refrigerator will be too hot and can make damage in long term ...and we can forget to put on in the morning.....

so he's suggestion is puting a bigger fan with low amps and better cfm !!!

I find a lot for sale on ebay but don't know my spec I have now

someone can help me to find the spec and or any suggestion ???

thank

[Gsmblue]

As far as I recall the standard fan is about 120cfm and has a 1 amp fuse in line. The actual fan has no info of use on it.

I used 3 of the artic F12 fans in Parallel for approx 180cfm and 0.75A max draw.

I mounted the fans to a piece of aluminum angle I bought from lowes for $4

The fans were about $7 on Amazon.

[socool69]

what I found is


model rodale dc brushless fan
fp-108/dc
model rcd12m12hwss

on the web ...

45 dba
105 cfm
0.6 amps
.7 watts

just to be sure I'm not wrong !!!