My girl and I have recently purchased a
1967 Overlander International as our first foray into travel trailering.
I am in the process of my first polishing of a pretty rough Overlander. I have noticed after stripping the clear coat.and wool bonnet first cut a lot of profanities in the aluminium.
Is there any chance of sanding through the outer layer (if there is one)?
I guess that's my real question, does the aluminium go all the way through the skin.
I have sanded one spot with 500, 1000,
1500 and 2000 grit and everything came out fine, with the exception of I didn't sand deep enough to remove the middle finger scratched into my baby.
Any information would be helpful.
Will