Exterior blue trim insert

[Kajtek1]

Hi. I am trying to find replacement for MISSED trim on my trailer. I have a trim on ebay and the seller send me the picture. My question is, that according to the picture, the exposed part is over 1/2" wide when flat.
The channel I have on the trailer has 3/8" from edge to edge.
So is it the correct size trim for my channel, meaning it need to bulge 3/16 when installed, or is it just a bigger insert?

[Inland RV Center, In]

Originally Posted by Kajtek1

Hi. I am trying to find replacement for MISSED trim on my trailer. I have a trim on ebay and the seller send me the picture. My question is, that according to the picture, the exposed part is over 1/2" wide when flat.
The channel I have on the trailer has 3/8" from edge to edge.
So is it the correct size trim for my channel, meaning it need to bulge 3/16 when installed, or is it just a bigger insert?

There are two sizes of belt line insert.

The exposed part is either 5/16" or 9/16" wide.

The large insert cannot be used for the small insert.

Andy

[Ganglin]

Didn't the 65 have a tape insert....

[Kajtek1]

Thanks Andy. I was hoping for your expertise.

[Inland RV Center, In]

Originally Posted by Ganglin

Didn't the 65 have a tape insert....

From 1973 and back, tape and/or paint was used in the moldings.

Some owners have updated the trailer with the new style moldings and inserts, especially when they may have needed a section of the old molding, that is no longer available.

Andy

[Silvertwinkie]

Here is some....not sure if it's what you need, but here it is just the same:

eBay Motors: Airstream Blue Beltline Trim Insert (item 110215956126 end time Jan-28-08 17:15:00 PST)

[Pop Rivet]

My 1990 Classic motor home has a trim insert all the way around the MH. The insert is 7/16" in the part that goes into the molding and 5/16" is the part exposed. I called Inlend RV and they told me to call Airstream and get a part number? Anyone know a source of this insert?

[Inland RV Center, In]

Originally Posted by Pop Rivet

My 1990 Classic motor home has a trim insert all the way around the MH. The insert is 7/16" in the part that goes into the molding and 5/16" is the part exposed. I called Inlend RV and they told me to call Airstream and get a part number? Anyone know a source of this insert?

When looking for parts, such as the molding inserts, it always helps when a dimension is provided.

We have, in stock, what your looking for.

Andy

[Pop Rivet]

Originally Posted by Inland RV Center, In

When looking for parts, such as the molding inserts, it always helps when a dimension is provided.

We have, in stock, what your looking for.

Andy

Cool - What do I ask for?

[Inland RV Center, In]

Originally Posted by Pop Rivet

Cool - What do I ask for?

Part # 70494 is the blue insert that's the size you listed.

Andy