I am in need of about 12 feet of the interior molding that has the white plastic nose insert in it. It is used around the headliner and in the bath in various models. I need it to hold the bottom of my headliner in place. Andy at Inland said AS no longer carries it. Is there anyone parting out a trailer with it, or does anyone know of where to find it? The white insert is called white plastic nose insert and it is available from several places. I need the molding that it goes in. Any ideas would be appreciated.
I was able to order it from out of door mark to replace the one in our 77 overlander,but it don't fit.It started to go in good but then stop.Has anyone else had this problem?
The molding strip is 1 1/16" wide. Most of the stuff that is available is 1" wide. I cut mine from the scrap left after installing new vinyl flooring in the bath. It is easily cut with a pair of scissors. Oops! I posted this and then realized that you are looking for the aluminum piece as well. OH WELL.
Hi Steve, We was able to use the insert from out of door mark but had to trim as we went it was hard.I'm still thinking of what we will use in the bathroom when we get ready to paint and finish it up.Lot of ideas out their. Good luck SARAH
After reading everyones suggestions, I came up with another solution for replacing the trim. Ours was missing a few pieces, but I liked the "yellowed" color and didn't want to replace all of it. We had removed the blue rub rail trim from the outside of the trailer, which was exactly the right size. We painted it with Krylon Fusion in "buttercream". Perfect match! It popped right into the metal trim and no one will know the difference between the new and old.
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.