Cushion layout for Dinette/Bed, 2011 23D Intl Serenity

[ksmuland]

Hello,
We just purchased our first Airstream and the previous owner had reconfigured the dinette/bed cushions. We need to replace and re-upholster them but cannot find a resource that shows a diagram of how the cushions fit together to make the bed. I was able to get the cushion specs and dimensions from Airstresam, but they don't show the layout. Any help would be greatly appreciated.
Thanks.

[Foiled Again]

If the prior owner reconfigured everything, it's quite possible that the cushions DON'T fit together to make a bed. lots of people don't think about a "next owner" when they make changes.

The Airstream factory has lots of .pdf files showing parts, etc. so you might be able to go to www.airtream.com and find out what the original layout was, OR possibly look on our own classifieds to see if there is a similar unit for sale.

Pictures of what you HAVE would help other 23D owners help you figure it out.

http://www.airstreamclassifieds.com/...ud-23-florida/

This is a 2013 - but I don't think the dinette changed between 11 & 13. The two back cushions go on top of the lowered table. The big wedge by the door - toss it under the table - or leave it where it is.


Paula

[ksmuland]

Paula, thanks for your reply. I don't have my trailer home yet-it is being serviced at our nearest dealer 2-1/2 hours away. It was very helpful looking at the photos in the link you provided. I had no idea the sofa could be made into a bed!!
Karen