|
11-30-2010, 10:08 AM
|
#1
|
2 Rivet Member
1968 26' Overlander
Del Rio
, Texas
Join Date: Aug 2009
Posts: 46
|
1966 Safari curtain rods
I am looking to replace the curtains in my 1966 22' Safari. Each window has a usual tract system along the top, but uses a rod system to hold the curtains along the bottom. Finding someone to make the curtains and finding the attachments for the top rail has not been a problem...however, my dilemma has been in finding the curtains rods for the bottom of the curtains. My trailer still has the mounting attachments for the rods in place under each window...but all the rods are gone. Anybody know where I can find replacement rods for this trailer.
|
|
|
12-02-2010, 02:22 PM
|
#2
|
2 Rivet Member
1968 26' Overlander
Del Rio
, Texas
Join Date: Aug 2009
Posts: 46
|
Nobody has any advice? Am I wrong in assuming that because there appears to 40+ year old curtain rod hangers below each window that originally this trailer did not come with the curtain rods. I have not heard or seen any other person refer to theses curtain rods. Should there have been the usual "C" railing like on the top of the windows?
Any advice would be greatly appreciated.
|
|
|
12-02-2010, 03:05 PM
|
#3
|
Rivet Master
1965 22' Safari
Vassar
, Michigan
Join Date: Jun 2009
Posts: 848
|
My 65 Safari did not have rods at the bottom. There was elastic cords near the bottom of the curtain that snapped to the wall and held them back. I don't know if a 66 was different. Hope this helps....Tim
__________________
Tim
TAC MI 14
Everyday is a Saturday
|
|
|
12-02-2010, 03:12 PM
|
#4
|
Rivet Master
1966 24' Tradewind
Placerville
, California
Join Date: Apr 2006
Posts: 3,328
|
Our '66 had/has a monofiliment line along the bottom. A PO changed out the curtains but the newer fabric doesn't stay in place very well. I'm just waiting to see what other replies you recieve.
Neil
__________________
Neil and Lynn Holman
FreshAir #12407
Avatar;
Kirk Creek, Big Sur, Ca. coast.
1966 Trade Wind
1971 Buick Centurion convertible
455 cid
1969 Oldsmobile Ninety Eight
455 cid
|
|
|
12-02-2010, 03:27 PM
|
#5
|
Rivet Master
1977 27' Overlander
1973 27' Overlander
1963 19' Globetrotter
Naples
, Florida
Join Date: Nov 2007
Posts: 1,259
|
In the classified someone has curtain rods for a 56 Flying Cloud,page 3,you may contact him and find out what he has. Dave
|
|
|
12-02-2010, 05:43 PM
|
#6
|
Rivet Master
1966 24' Tradewind
Chicago
, Illinois
Join Date: Nov 2008
Posts: 530
|
Funny Ive never seen rods on the bottom of mine, the curtains I made are lined and stay close enough to the window and they are longer than the window so I have not had any issues not securing them.
__________________
Happy Trails!
|
|
|
12-02-2010, 07:58 PM
|
#7
|
2 Rivet Member
1966 20' Globetrotter
1993 34' Limited
Hugo
, Minnesota
Join Date: Oct 2009
Posts: 35
|
Our '66 GlobeTrotter had elastic cords at the bottom of the windows. The original curtains had shrunk so I am not sure if the cord ran through the bottom hem of the curtains or not. I tried doing that with the new curtains I made (new shock cord too) but wasn't particularly impressed with the results. I may try some rings at the bottom or just let the curtains hang. Too cold to go out and experiment on them now!
|
|
|
12-02-2010, 09:39 PM
|
#8
|
3 Rivet Member
1965 17' Caravel
Birmingham
, Alabama
Join Date: Apr 2007
Posts: 180
|
Our 65 Caravel had the bungies too. It didn't work for us very well. Probably because our curtains were home made, regular type rather than the plush original style. We ended up discarding the bungie method and making a snap-on matching cloth ribbon instead. We tuck the curtain behind the ribbon and against the screen.
|
|
|
12-02-2010, 10:01 PM
|
#9
|
Rivet Master
1967 22' Safari
MILAN
, Illinois
Join Date: Dec 2004
Posts: 2,013
|
Maybe Andy R. From InlandRV knows....
I too have the small hooks below all my windows and assumed the small (1/4 or 1/8th inch) adjustable rods were what was originally used to hook onto them. I have seen them available in the kitchen curtain lines (for valances) in Lowes in the past. They are just an adjustable round rod with brass looking ends with holes to hook onto the hardware below the windows. I know they were what was being used in my trailer as two of their rusty carcasses were found among the old moldy curtains we threw away when we first brought the trailer home. They were slid thru a guide pocket at the bottom of the curtain material and one was still in use behind the galley sink. I suppose the elastic bungee could also have served that purpose, but it seems to me they would be easily damaged by UV and lose their stretchability in a short period of time. Ed
__________________
1967 Safari Twin "Landshark" w/International trim package
2014 GMC Sierra 1500 Double Cab SLE
FORUMS MEMBER SINCE 12/16/2004AIR#7110
"My tire was thumping, I thought it was flat. When I looked at the tire, I noticed your CAT!" Burma Shave
|
|
|
12-13-2010, 12:28 PM
|
#10
|
2 Rivet Member
1968 26' Overlander
Del Rio
, Texas
Join Date: Aug 2009
Posts: 46
|
OK...upon further inspection it appears as thought the lower curtain attachments are not for curtain rods but in fact for an elastic cord which was attached to the bottom of the curtains. Apparently this was the older style of holding the curtains up against the curved interior. Thanks for all y'alls help. Now for a more difficult question...How exactly was this elastic cord attached to the curtains. My guess is that is was run through the bottom hem. Where can I find a suitable replacement elastic cord and the attachment ends which fit into the existing hardware.
|
|
|
12-13-2010, 02:02 PM
|
#11
|
4 Rivet Member
1964 22' Safari
Foresthill
, California
Join Date: Aug 2004
Posts: 257
|
My 64 curtains had small white plastic rings sewn to the curtain for the elastic cord to run through. One ring every few inches.
The elastic cord has snaps on the ends that snap to wall.
I have the snaps (all four parts) for the elastic cords, be glad to send you some if you need them (JoAnnes Fabrics probably sells them).
I also need a source for the cord. I used parachute cord, it works but not quite right.
|
|
|
12-13-2010, 06:08 PM
|
#12
|
Rivet Master
1966 26' Overlander
Woodstock
, Georgia
Join Date: Feb 2002
Posts: 8,525
|
ours had cord at the bottom also. We will be going with plastic track when we get to doing the curtains in a few months. Cheap and works well.
|
|
|
12-13-2010, 07:29 PM
|
#13
|
Rivet Master
Join Date: Sep 2004
Posts: 1,806
|
What they used was a standard crimped eletrical connector at the end of the cord (Eye type). The cord ran through a standard curtin rod brass connector (the type when you squeeze it together it opens, allowing you to place the fabric between the "jaws" then release to hold it in place). This held the curtin close to the wall.
My 1966 Overlander had the original curtins, hooks, cords, etc... and is how it was replaced during the restore.
Hope this helps.
__________________
Paul Waddell
|
|
|
12-13-2010, 09:33 PM
|
#14
|
4 Rivet Member
1964 22' Safari
Foresthill
, California
Join Date: Aug 2004
Posts: 257
|
Can you post a photo of this set up?
What type of cord material did you use to replace the cord?
|
|
|
12-13-2010, 11:41 PM
|
#15
|
Rivet Master
1964 22' Safari
modesto
, California
Join Date: Jul 2010
Posts: 1,097
|
Try this place for elastic shock cord. Elastic, Cord & Webbing, Inc. - Elastic, Webbing, Tapes and Cords . Walter can you post a couple of pics of your curtains with the rings. I think that is a great idea.It would allow the curtain to pleat.
|
|
|
12-14-2010, 05:59 AM
|
#16
|
2 Rivet Member
1968 26' Overlander
Del Rio
, Texas
Join Date: Aug 2009
Posts: 46
|
Rideair,
Thanks for the info. I too would like to see a few pics of your curtains, I'm afraid I really do not understand what you are referring to when you talk about the elastic cord running through the brass curtain rods. A picture would help tremendously.
|
|
|
01-21-2011, 07:19 AM
|
#17
|
New Member
1966 30' Sovereign
Zelienople
, Pennsylvania
Join Date: Jul 2010
Posts: 1
|
My 66 has the lower curtain rods
|
|
|
01-22-2011, 08:52 AM
|
#18
|
Rivet Master
1964 22' Safari
modesto
, California
Join Date: Jul 2010
Posts: 1,097
|
Hello Man In A Tin,
maybe you have some photo's you will share. Hope you have the curtains as well as the rods. I would like to see the plastic rings and how they attach.
Dennis
|
|
|
01-25-2011, 11:18 PM
|
#19
|
4 Rivet Member
1964 22' Safari
Foresthill
, California
Join Date: Aug 2004
Posts: 257
|
I'm photo challenged. I'll try when I get home next week.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
Curtains and Curtain Rods and hangers
|
shermantic |
Upholstery, Blinds, Walls & Interior Finishes |
3 |
01-08-2009 07:05 PM |
curtain, curtain rods etc for 1968 soveriegn
|
tvadman1963 |
Upholstery, Blinds, Walls & Interior Finishes |
8 |
01-04-2009 03:25 PM |
Oh No! - no curtain rods
|
Doogie521 |
Upholstery, Blinds, Walls & Interior Finishes |
1 |
06-09-2008 05:41 PM |
Need replacement curtain rods '77 Argosy
|
Tim Can |
Upholstery, Blinds, Walls & Interior Finishes |
0 |
06-07-2007 11:41 PM |
Curtain "rods" ~ c- channel ???
|
CaddyGrn |
Upholstery, Blinds, Walls & Interior Finishes |
9 |
06-26-2006 10:28 PM |
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|