damaged in transport need panels

[greg176]

Yes Bruno I know the front panel has a compound curve and that is why I sugggested contancting Andy.As far as i know the lower aft panel has only a simple curve,it did on mine,and can be replaced with a flat panel.Hold a straight edge vertically accross the panel, if it is flat it can be replaced with a flat sheet.i would suggest Remco asks Andy.

[brunoffrance]

Here is the copy from CG trailers for the panels, rear bumper and the specific tool: the shaver and rivets:

"Bruno:

I have your prices:

1971 28' Airstream.

Segment #2 384.28
Segment#5 399.06
Verticle brace 25.62
R/S underbelly wrap 66.43
Horizontal rear bow lower 66.75
Horizontal rear bow upper 99.78
Bumper 335.07
220 Olympic loc rivets 136.40
2 Tubes sealant 17.90"

and the estimated shipping to FRANCE;

"Bruno:

I have a response from Airstream. Airstream recently sent a shipment to
Germany by Nation's Express. Your shipment would be similar to that one.

The charges were $1277.00. Shipping time was about one week.

Hope this helps."


These prices are only ONE year old; the A/S was repaired on 19th june 2004.

Bruno;