|
08-08-2014, 08:36 PM
|
#1
|
3 Rivet Member
Anchorage
, Alaska
Join Date: Oct 2010
Posts: 230
|
1963 Bambi Skin .040 ?
I could have swarn I read that early 60's skins were .032.
Took a side panel to 2 separate machine shops, they each confirm my measurement of .040
Does this seem right ?
|
|
|
08-08-2014, 08:47 PM
|
#2
|
Rivet Master
Airstream Dealer
Corona
, California
Join Date: Feb 2002
Posts: 16,497
|
Quote:
Originally Posted by Aktundra
I could have swarn I read that early 60's skins were .032.
Took a side panel to 2 separate machine shops, they each confirm my measurement of .040
Does this seem right ?
|
No.
Andy
|
|
|
08-08-2014, 10:07 PM
|
#3
|
Rivet Master
1973 21' Globetrotter
Houston
, Texas
Join Date: Sep 2009
Posts: 3,322
|
Not to my knowledge. Should be. 032. Maybe they can confirm the alloy. Should be 2024 t3 Alclad.
|
|
|
08-08-2014, 10:44 PM
|
#4
|
3 Rivet Member
Anchorage
, Alaska
Join Date: Oct 2010
Posts: 230
|
Just looking for a micrometer so went to a machine shop. (sometime calipers pick up a ripple ). Not sure they would be much help on the alloy.
On my Bambi, there is only 1, 70" panel connecting the end caps. Perhaps on the short Bambi only, there was a need for more rigidity ?
|
|
|
08-10-2014, 08:28 PM
|
#5
|
Rivet Master
1973 21' Globetrotter
Houston
, Texas
Join Date: Sep 2009
Posts: 3,322
|
I hadn't ever heard of anything thicker than .032 prior to the early 80's. The reason I was asking if the shops could identify the alloy was because I was guessing that maybe a previous owner had already replaced this panel, and maybe they used a modern allow in a modern thickness, rather than 2024 T3 Alclad in .032.
|
|
|
08-13-2014, 11:49 AM
|
#6
|
Rivet Master
Airstream Dealer
Corona
, California
Join Date: Feb 2002
Posts: 16,497
|
Quote:
Originally Posted by Belegedhel
I hadn't ever heard of anything thicker than .032 prior to the early 80's. The reason I was asking if the shops could identify the alloy was because I was guessing that maybe a previous owner had already replaced this panel, and maybe they used a modern allow in a modern thickness, rather than 2024 T3 Alclad in .032.
|
Using .040 instead of .032 causes zero problems.
Andy
|
|
|
08-13-2014, 03:56 PM
|
#7
|
Rivet Master
1973 21' Globetrotter
Houston
, Texas
Join Date: Sep 2009
Posts: 3,322
|
What I was getting at is that if a PO had replaced the original panel made of Alclad with some other alloy, regardless of thickness, then you may notice the difference when you try to shine it up. However, as you have already removed the side panel, I might assume this means you intend to replace it, in which case it doesn't matter what the previous owner did as long as you are happy with the alloy you are using as a replacement.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|