Roll up cabinet door replacement?

[kbarrett12]

My husband and I just started our reno today! I've been checking out the forums for a while but this is my first question!

We have a 1972 31' Sovereign. The existing cabinets are in good shape except for the roll up sliding doors. Some are stuck, and some are sticky and you have to really push/pull to get them up and down. Is it possible to replace the roll up doors? Does anyone sell them? I haven't had luck finding replacements online.

Thanks!

[perryg114]

Get some silicone spray. It helps fix most of the sticky problems. The big problems are when the PO cuts them because they get tired of them sticking. It comes back to poor maintenance. Apply the spray to the track upper and lower.

Perry

[kbarrett12]

Thanks! will try it!

[mwernke]

Tambour listed in parts forum. He will cut to size. http://www.airstreamclassifieds.com/ads/tambour-3/

[Inland RV Center, In]

Originally Posted by mwernke

Tambour listed in parts forum. He will cut to size. Tambour

The tambour door material can be ordered from parts stocking dealers, and some even cut it to your dimensions.

At least that way you would know that the material is fresh.

Andy 15700

[perryg114]

The stuff is more expensive per ounce than gold.

Perry

[Inland RV Center, In]

Originally Posted by perryg114

The stuff is more expensive per ounce than gold.

Perry

Perry.

Not cheap, but first class stuff.

A 4 X 8 sheet is cheaper than cut pieces, by the square foot.

A lot of waste when cutting them to size, plus a little labor.

Andy