How to remove cabinet?

[Bfrank]

I have a 79 MH and the overhead kitchen cabinet that has two tambor sliding doors. It needs to be removed and repaired one side is drooping badly. My question would be how is the trim peice attached to the inner skn of the inner roof panel. mine has a long strip on the edge of the inner roof panel and only one rivet at the front end behind the head liner with what looks to be a small end trim cap. Do I drill the rivet and then remove the trim from the side edge of the inner roof panel to get to the rivets that are holding the cabinet up? It is one long peice of trim that looks to be slipped over the edge of the center roof panel? Hopefully I don't have to remove the inner skin from the roof because I think I would have to remove the divider curtain the wall at the end of the cabnet the inside A/C shroud the roof vents etc so any one that has done this can I get some tips for the removal? I'll try to post some pics in this and see what happens. I need to do this right the first time. Thanks