Front Cabinet Parts NEEDED

[shermantic]

We are working on a 1973 Argosy we are in need of some interior parts such as head tambours and aluminum parts for the kitchen cabinets. If anyone is parting some out or has some left overs please pm me or post...

[Carolinda]

Unfortunately, I need parts as well--a drawer from the lounge gaucho and a trim piece from the "chest of drawers" cabinet under the "bedroom window". I have a Magic Chef stove free to a good home, avocado, and sink to match with original faucet and trim. We need luck, I think!

[Condoluminum]

If you search here for tambour or tambor you'll find threads with sources of new tambour roll up material, in various finishes and colors..

The aluminum structural parts for cabinets are not going to be easy, and you may have to try fabricator or local welding shop kind of place to see if they can work with metal stock to make parts...

[crabbey1]

I have some leftover metal parts from a door and from some cabinets from a 76 Argosy. I knew I saved them for some reason... Do you have a photo of what you are looking for specifically? I also have some random parts here and there... Just post exactly what you need and I will look.

[Carolinda]

Here are the dimensions, and I'll learn how to upload the photos. Terrific for me, hopefully, that you did save parts. My ebay name is not-a-hoarder, which is a joke, because I, too, tend to save stuff "just in case". The drawer face is 16 1/2" x 6" and the trim/support piece inside the "chest of drawers" is 16 5/8", although longer is just fine as that can be cut easily. Thanks for looking for these--I sure don't want to fabricate the parts if I can help it. Also, as long as you are poking around, I could use the extruded aluminum channel that holds the panel at the door by the refrigerator--the straight piece nearest the center of the trailer, not the curved piece, which, fortunately is still there. Thanks!
/Users/carolindabrooks/Desktop/IMG_6495.JPG
/Users/carolindabrooks/Desktop/IMG_6497.jpg

[Carolinda]

This wretched Newbie finally may have figured out how to post photos. I'll try again, with smaller photos.
[IMG]Photo from Oct 25, 2013 copy.jpg[/IMG]
[IMG]Drawer needed Argosy Oct 25, 2013 copy.jpg[/IMG]

[Carolinda]

[IMG]Drawer needed Argosy Oct 25, 2013 copy.jpg[/IMG]
[IMG]Photo from Oct 25, 2013 copy.jpg[/IMG]

Sorry for duplicates if previous pics did load--I can't see them when I close my browser window and come back to this thread. Going to try a third and final time with low pixel copies through "Reply to Thread" rather than "Quick Reply".

[Carolinda]

I posted, finally, photos in the Members Photos under the name Carolinda. Click the grey/silver tab "Photos" way at the top of page just under the Airstream logo to view. Phew! Hope you can locate the 3 parts: the drawer face, the trim/support piece and the refrig panel channel. Thanks again.