Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 09-30-2012, 04:11 PM   #1
2 Rivet Member
 
beerrun'r's Avatar
 
2013 25' Flying Cloud
ARTHUR , Illinois
Join Date: Dec 2007
Posts: 60
Adjusting cabinet hinges

What is the procedure for adjusting and tightening (and keeping tight) these infernal cabinet hinges?
beerrun'r is offline   Reply With Quote
Old 09-30-2012, 05:05 PM   #2
4 Rivet Member
 
BeachHouse's Avatar
 
2005 25' International CCD
Lilburn , Georgia
Join Date: Dec 2011
Posts: 285
Blog Entries: 1
The back screw adjusts the in and out. The middle screw adjusts the up and down. The front screw adjusts the right and left. Post a pic of the hinge if you meed more info. We run a cabinet shop.

My grand parents are buried in Arthur but havent ever been there. My dad and brothers take care of the cemetary.
BeachHouse is offline   Reply With Quote
Old 09-30-2012, 06:24 PM   #3
Rivet Master
 
1977 31' Sovereign
1963 26' Overlander
1989 34' Excella
Johnsburg , Illinois
Join Date: Jul 2005
Posts: 2,944
Procedure for adjusting newer cabinet hinges.

They put the procedure in the October 2012 Blue Beret on page 40. They just posted that issue to the web. Here is the link. Blue Beret Online Magazine-Home
dwightdi is offline   Reply With Quote
Old 09-30-2012, 06:47 PM   #4
2 Rivet Member
 
beerrun'r's Avatar
 
2013 25' Flying Cloud
ARTHUR , Illinois
Join Date: Dec 2007
Posts: 60
Thanks. But.........it leaves unanswered my main question. It says that the three screws DO NOT TIGHTEN THE HINGE......so what does? He asked. I don't know about you, but constantly tinkering with these little gems is not how I like to spend my time. Surely there's a way to keep them tight. (besides not traveling and not opening the doors)


Quote:
Originally Posted by dwightdi View Post
They put the procedure in the October 2012 Blue Beret on page 40. They just posted that issue to the web. Here is the link. Blue Beret Online Magazine-Home
beerrun'r is offline   Reply With Quote
Old 09-30-2012, 06:50 PM   #5
2 Rivet Member
 
beerrun'r's Avatar
 
2013 25' Flying Cloud
ARTHUR , Illinois
Join Date: Dec 2007
Posts: 60
Quote:
Originally Posted by jupitorj View Post
My grand parents are buried in Arthur but havent ever been there. My dad and brothers take care of the cemetery.
Small world!
beerrun'r is offline   Reply With Quote
Old 09-30-2012, 07:30 PM   #6
Master of Universe
 
Gene's Avatar
 
2008 25' Safari FB SE
Grand Junction , Colorado
Join Date: Sep 2007
Posts: 12,702
I think you may be having trouble with the screws that hold it to the cabinet and door. They have a habit of working themselves out and making the holes bigger. You can get a filler that fills the hole and then you put the screw back in. I know Super Glue has a filler for that.

The screws would be the ones that don't adjust it.

Gene
Gene is offline   Reply With Quote
Old 10-01-2012, 08:23 AM   #7
2 Rivet Member
 
beerrun'r's Avatar
 
2013 25' Flying Cloud
ARTHUR , Illinois
Join Date: Dec 2007
Posts: 60
Quote:
Originally Posted by CrawfordGene View Post
I think you may be having trouble with the screws that hold it to the cabinet and door. They have a habit of working themselves out and making the holes bigger. You can get a filler that fills the hole and then you put the screw back in. I know Super Glue has a filler for that.

The screws would be the ones that don't adjust it.

Gene
No. It's the hinge mechanism itself that jiggles out of adjustment.
beerrun'r is offline   Reply With Quote
Old 10-01-2012, 08:40 AM   #8
4 Rivet Member
 
BeachHouse's Avatar
 
2005 25' International CCD
Lilburn , Georgia
Join Date: Dec 2011
Posts: 285
Blog Entries: 1
These hinges consist of two parts. The hinge and the mounting plate. The mounting plate is screwed to the cabinet. And the hinge is screwed to the door. Those screws can come loose, though not often. The hinge clips to the plate without screws (some older hinges do screw to the plate, but not the ones on my older '05 trailer so I wouldn't think yours would). The three screws in the hinge are for adjustment only. I haven't had them get loose unless they are over loosened as part of the adjustment. Perhaps some locktite on the adjustment screws is needed. Locktite will make it more difficult to adjust in the future, but usually not impossible. You would just have to break the 'glue' hold. In a worst case you would have to get a new hinge.
BeachHouse is offline   Reply With Quote
Old 10-01-2012, 08:52 AM   #9
Rivet Master
 
1977 31' Sovereign
1963 26' Overlander
1989 34' Excella
Johnsburg , Illinois
Join Date: Jul 2005
Posts: 2,944
Loctite is available in in a number of grade strengths. Talk to NAPA or other sources to pick the one that provides just enough strength. So grades are so strong they can replace welding is specific applications.
dwightdi is offline   Reply With Quote
Old 10-06-2012, 02:24 PM   #10
Always Airstreaming!
 
rickandsandi's Avatar
 
2005 22' Safari
1960 24' Tradewind
Anytown , Connecticut
Join Date: Oct 2006
Posts: 3,115
Send a message via AIM to rickandsandi
We have a 2004 Safari and have hinges failing all over. Right now all three hinges on the wardrobe are off. It almost appears to look like the bases are worn so that the clamp on the adjusting part won't stay put. Hopefully I am just doing something wrong that some one can help me with.
__________________
J. Rick Cipot
Sandi Gould
NEU New England Unit
Airstream Life Magazine
Proud Member of WBCCI
WBCCI #3411
AIR #17099
2009 Silverado 2500HD
2004 22' Safari
1960 24' Tradewind
rickandsandi is offline   Reply With Quote
Old 10-06-2012, 04:36 PM   #11
4 Rivet Member
 
BeachHouse's Avatar
 
2005 25' International CCD
Lilburn , Georgia
Join Date: Dec 2011
Posts: 285
Blog Entries: 1
It sounds like you should replace them if they are worn. If you post a picture I can probably tell you where you can get them.
BeachHouse is offline   Reply With Quote
Old 10-06-2012, 04:59 PM   #12
Rivet Master
 
ROBERTSUNRUS's Avatar

 
2005 25' Safari
Salem , Oregon
Join Date: Mar 2006
Posts: 8,369
Images: 18
Blog Entries: 55
Hi, my cabinet hinges kept coming loose, so I used blue Loc-tite on them. They are a real pain especially on my large [three hinge] closet door.
__________________
Bob 2005 Safari 25-B
"Le Petit Chateau Argent" Small Silver Castle
2000 Navigator / 2014 F-150 Eco-Boost / Equal-i-zer / P-3
YAMAHA 2400 / AIR #12144
ROBERTSUNRUS is offline   Reply With Quote
Old 04-06-2017, 06:17 PM   #13
2 Rivet Member
 
2002 27' Safari
Churchville , Maryland
Join Date: May 2008
Posts: 29
My 2003 28' Safari has bad wardrobe hinges that were made by Grass. I would like to know where to get replacements. CabinetParts.com sent me what they claimed to be replacements but they did not fit correctly. These hinges require adjustment after 300 miles of interstate. I see no way of dealing with the worn out hinges except a continuous hinge replacement. Would appreciate photos from anyone who has made this change.
Cable is offline   Reply With Quote
Old 04-06-2017, 06:32 PM   #14
4 Rivet Member
 
2017 26' Flying Cloud
Granbury , Texas
Join Date: Jan 2012
Posts: 412
If the hinge is coming undone from the plate that mounts to the cabinet then some have suggested using wire ties to hold the two parts together.

These euro hidden hinges are used in many cabinet applications. The cup size and offset are the only requirement to know for replacement. You will need to replace the door part of the hinge and the cabinet part...which may require new screw locations.

If you have a screw stripped...put some woodworking glue and a toothpick in the hole. break the toothpick off flush with the hole and let the glue dry...reinstall the screw being careful not to tighten past snug maybe a tad bit more but do not over do it.
cabinetmaker is offline   Reply With Quote
Old 11-09-2018, 06:32 AM   #15
2 Rivet Member
 
56ovalwindow's Avatar
 
2005 28' Safari S/O
Bountiful , UT
Join Date: Sep 2018
Posts: 57
Yes, I realize this post is 18 months dead, but good information is never dead. As a former cabinet shop supervisor, I can tell you the Blum hinge plates and hinges were our first and only choice. It sounds like AS is using the small #6 or #8 wood screws to secure the plates. Blum has a base plate with 5mm screws and these rarely back out. We just bought our AS so I will have a look at the hinge combination they use, and I will switch to the Blum system if its not already in the trailer. The fun begins.
56ovalwindow is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
27FB Bathroom overhead hatch with mirror too heavy for the hinges Terratravels 2009-2015 Flying Cloud 9 07-30-2012 11:14 AM
Aargh- how do I remove this cabinet?? NoMoSOBs Interior Restoration Forum 3 06-06-2011 07:45 PM
nt-22A cabinet tracker Furnaces, Heaters, Fireplaces & Air Conditioning 3 04-13-2011 09:54 AM
2009 Loose Cabinet Screws tmarquis Cabinets, Counter Tops & Furnishings 18 04-11-2011 04:08 PM


Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.



All times are GMT -6. The time now is 06:07 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.