Boy are we having fun restoring our 64 Overlander we bought about 6 weeks ago. Someone painted the interior cabinets orange and Andy has been stripping them back to the orginal.We are overhauling some of it but need to get a wiring diagram, any suggestions?
Through your experience, what is best way to replace the wiring? Can I do it without taking inside walls down?
I was fortunate in not having to replace my wiring (other than the pigtail). In order to replace all the wiring, then it would probably be easiest to pull out the lower wall panels. I would try and isolate exactly which wiring you're having issues with and replace just that. Unless you're wanting a complete gut & restoration.
I sat in my bare trailer all afternoon contemplating the wiring issue, and thought of something that may work well and make future changes much easier.
Want to know if anybody else has done this....
Thinking of eliminating all current wiring completely, and starting from scratch. Will remove outlets, push wiring back in to wall (covering walls completely so will be no holes). I would then fashion a conduit down the center top of the trailer and sideways to where it needs to go. A decorative cover with LED lighting will hide the conduit along the celing and walls.
If at anytime in the future I needed to add change or remove something it would all be right at my fingertips.
Quick Links
Linear Mode
