SeeLevel II Battery Monitor

[Teton Stream]

Trading in my 2013 FC 20' and picking up a 2017 FC 23 FB. I noticed AS has switched the monitoring system. Is the SeeLevel II battery monitor any better than the MicroPulse System. I put a Trimetric on the 2013 because the MicroPulse battery monitor was so bad.

[dznf0g]

SeeLevel actually works (if installed properly ) and mine has been flawless.

[68 Overlander]

It is night and day better. You will love the SeeLevel but it but it doesn't totalize your amp hours like the Trimetric or have the other features.

[dznf0g]

Not only that, but with the SeeLevel monitor being on a long run from the batteries, it reads lower than actual battery voltage. .1 volt in my case.

[TimeForFun]

The voltage reading should not read an error from the length of wires. The volt meter is a high impedance device so minimal current is drawn. Therfore undetectable voltage drop. Meter probably has a slight error

[dznf0g]

The length of wire does introduce resistance, as well as there may be 1 or more connections between the positive buss and the wall above the counter, some 15 feet away. It is not a dedicated circuit, but I don't recall what else is on that run.