Look what I found

[nwclassic]

After reading posts re TV reception upgrades, I decided to install the Winegard UHF attachment and the signal tuning plate up front where the 12v plug in plate was. Project advancing well until I attempted to stow the wires in prep for attaching the face plate. Then I saw this… that's the cable wire with the screw hole in it. Good that I found it. My coax connectors don't seem to fit that cable so another run to Home Depot.
Before anyone asks -- that plate had never been off so it had to be a factory 'gift'.

[68 Overlander]

Wow

[Al and Missy]

Maybe too late, but go to STORE mode and disconnect from shore power before installing the plate. The bare contacts on the power connector can contact the trailer shell and blow a fuse. Don't ask how I know.....

Al