Anyone interested in swapping a tank sensor?

[RankAm]

I have the Sea Level II 709 tank level sensors and display unit, and I have 3 of the 710ES (about 12”) sensor strips.

I can use two of the 12” sensors (which can be cut down to no less than 6”), but the third 12" sensor is too long/high for my 4” belly pan gray tanks.

If anyone has a 710JS sensor (about 6”, and which can be cut down to 4) and is willing to swap that for one of my 12” 710ES strips, please let me know.

Many thanks.

Hank

[RankAm]

Problem solved: I have learned that a 12" sensor can be cut to 4 1/2" and then mounted slightly off of vertical on a 4" gray tank and still give a good reading.

No one need respond to my request for a swap.

Hank

[DaveMc]

Awesome news! Thanks for sharing that part, hope it helps someone out down the road.

I had the See Level II installed as part of a large reno in the spring. I love it, but that may be because the old MicroPulse didn't work at all...