Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-03-2018, 12:37 PM   #29
3 Rivet Member
 
Joyflea's Avatar
 
1967 26' Overlander
Alpine , Texas
Join Date: Jul 2018
Posts: 154
Have a question .

The sub floor is all bolted down to the frame . Treeing up the body . Are the sides from the cap ends straight ? Will be ready to bolt the body down soon as I know . Thanks Blue .
__________________

Joyflea is online now   Reply With Quote
Old 08-04-2018, 12:01 PM   #30
3 Rivet Member
 
Joyflea's Avatar
 
1967 26' Overlander
Alpine , Texas
Join Date: Jul 2018
Posts: 154
Help

Still need to know if sides are straight . Anyone with a similar model have time to run a string line down the side a floor level ?
Also , I am a documentary of thing I take apart with photos , I canít figure out where the two angles go ? Any help would be great to know . They are about 4x4-30 long .

While I wait for info on sides one more day , I made a replacement piece to go between the floor and frame in the back by tha bumper . I didnít have a brake long enough to bend a flange on the back of it . This is something I wanted to add , so I used my bead roller to bend it over and put a stiffer area to fuport a gasket Iím going to use . Came out workable and fits good .Click image for larger version

Name:	E67C08B8-17D6-4C71-B1B3-D4D83DE84B50.jpg
Views:	53
Size:	213.9 KB
ID:	318862

Click image for larger version

Name:	92B29511-D787-4159-A217-65A5094ADC39.jpg
Views:	54
Size:	237.4 KB
ID:	318863

Click image for larger version

Name:	6D019788-A5C0-4E2D-9035-3168AA38A6D0.jpg
Views:	52
Size:	287.6 KB
ID:	318864

Click image for larger version

Name:	31A45D27-5DA7-4FAC-A5A7-11AFD7CD9E3B.jpg
Views:	58
Size:	206.3 KB
ID:	318865

Click image for larger version

Name:	6BFB184B-5015-455A-A1FC-F7643BA141B9.jpg
Views:	55
Size:	194.8 KB
ID:	318866

Click image for larger version

Name:	9532B46D-FA15-4D9D-B759-42343227E9F2.jpg
Views:	56
Size:	191.7 KB
ID:	318867

Click image for larger version

Name:	B3AD35EF-8C17-46A1-9B25-83CFEF494502.jpg
Views:	51
Size:	215.9 KB
ID:	318868

Click image for larger version

Name:	84660E8E-FB01-4A58-9FC0-3C24D6B82FF9.jpg
Views:	55
Size:	204.6 KB
ID:	318869
__________________

Joyflea is online now   Reply With Quote
Old 08-06-2018, 06:59 AM   #31
Rivet Master
 
dbj216's Avatar

 
1986 34' Limited
1975 27' Overlander
Conifer , Colorado
Join Date: Jun 2009
Posts: 4,826
Images: 1
Hi Joyflea: I "assume" there is nothing straight on an Airstream body. That said, I believe the aluminum under the front and rear end caps on the mid sixties trailers are sloped out, or more than 90 degrees to the subfloor and frame rails. The new body starting in 1969 is definitely not straight down, it slopes in quite a bit.

It looks like you made a great "flashing" between the bumper gap and the body. Airstream just used a flat piece of aluminum sheet there, which allowed rain water to splash and then migrate into the cut ends of the subfloor. Rot, rot, rot away subfloor.

David
Attached Thumbnails
Click image for larger version

Name:	1406 Bumper Storage Door Closed-800x600.jpg
Views:	49
Size:	47.0 KB
ID:	319083  
__________________
WBCCI #8607
VAC Region 11

Link to my 1975 Overlander Improvement Journal:
https://www.airforums.com/forums/f17...ml#post2053792
dbj216 is online now   Reply With Quote
Old 08-07-2018, 08:29 AM   #32
Rivet Master
 
Aerowood's Avatar

 
1971 21' Globetrotter
Arvada , Colorado
Join Date: May 2006
Posts: 2,926
Quote:
Originally Posted by Joyflea View Post
Still need to know if sides are straight . Anyone with a similar model have time to run a string line down the side a floor level ?
I used an aluminum "I" beam clamped to the ribs to insure the sides were straight. I also made a long stringer over the wheel wells as I did not like the bottom of the ribs floating. It's somewhere in my thread below.
Aerowood is offline   Reply With Quote
Old 08-07-2018, 03:43 PM   #33
3 Rivet Member
 
Joyflea's Avatar
 
1967 26' Overlander
Alpine , Texas
Join Date: Jul 2018
Posts: 154
Floor bolted , unbolted , and bolted . I can fix that .

Ok so Iíve had my welder in the way for a while . I had something to weld but couldnít remember what it was ,?

So using a long straight edge bolted to ribs I got my floor tied into the frame and wall Channels together . Started bolting down the door frame and I remember what I needed to weld . I replaced all the frame around the door but hadnít done the two small wrap pieces on the bottom of door where the stap slides up into . So time to unbolt and get that done . Easy fix . Cut two small 14ga pieces and bent my radius . I used this bending horse I made . Itís nothing but 3 different sized pipes with a gap between each . I use it more than my roller . Tacked to outriggers , ground , por15 , and done . Will seam seal from back Side before I undercoat .
Rebolted , polished up the Al. Piece , it had been wirewheeled , polished it up some so it wonít be so hard when I do the trailer . The smug you see Is rubber tape sealer on back side .
And I got to take my welder back into my shop , YEA one more thing fixed .Click image for larger version

Name:	935F2406-0DB2-409D-9C22-1A4F75E073E0.jpg
Views:	41
Size:	206.4 KB
ID:	319194

Click image for larger version

Name:	85748E8D-6454-4EFC-A05C-A9669FF23A26.jpg
Views:	39
Size:	249.1 KB
ID:	319195

Click image for larger version

Name:	86C3929D-2B0F-4437-B57C-ED0E87006FAA.jpg
Views:	42
Size:	258.1 KB
ID:	319196

Click image for larger version

Name:	63A9ED69-070C-4E6C-A012-8E412B948CC2.jpg
Views:	43
Size:	313.0 KB
ID:	319197

Click image for larger version

Name:	DA9372A6-890B-4619-8BB9-3F61B0A80852.jpg
Views:	42
Size:	254.5 KB
ID:	319198

Click image for larger version

Name:	59462614-1876-4C0E-A1FE-A0A5E96D883B.jpg
Views:	38
Size:	260.8 KB
ID:	319199

Click image for larger version

Name:	EC0635CD-1539-48D1-A130-1E62BB57EF3B.jpg
Views:	41
Size:	278.2 KB
ID:	319200

Click image for larger version

Name:	AB9238BD-3E03-4A76-B24A-151489E64843.jpg
Views:	41
Size:	276.2 KB
ID:	319201

Click image for larger version

Name:	5F06EA8C-50EE-4DA3-8D4D-39F5F978D3F1.jpg
Views:	43
Size:	336.9 KB
ID:	319202
Joyflea is online now   Reply With Quote
Old 08-07-2018, 06:16 PM   #34
3 Rivet Member
 
Joyflea's Avatar
 
1967 26' Overlander
Alpine , Texas
Join Date: Jul 2018
Posts: 154
Avatar

I canít wait to start working on the interior. I love to beadroll al. I changed my avatar to what I love to do . Canít really see it but her it is . And this is what I love to do . Stay tuned for something different in the inside .Click image for larger version

Name:	4E6CFD9E-CDAF-4C93-8BAD-AFC07A4B7997.jpeg
Views:	49
Size:	175.0 KB
ID:	319217

Click image for larger version

Name:	ED3DA2EF-692A-4B72-B229-37C64017D624.jpeg
Views:	51
Size:	227.0 KB
ID:	319218
Joyflea is online now   Reply With Quote
Old 08-07-2018, 06:24 PM   #35
Rivet Master
 
Hittenstiehl's Avatar
 
1962 28' Ambassador
1961 19' Globetrotter
Mesa , Arizona
Join Date: Jun 2013
Posts: 3,749
Images: 9
Joy, that is very cool. Nice craft.
__________________

Hittenstiehl
Hittenstiehl is offline   Reply With Quote
Old 08-07-2018, 08:06 PM   #36
Rivet Master
 
dbj216's Avatar

 
1986 34' Limited
1975 27' Overlander
Conifer , Colorado
Join Date: Jun 2009
Posts: 4,826
Images: 1
Well, you are the first vintage Airstream enthusiasts who prefers "bead rolling". We use to call that marbles when I was a kid. I bet not many folks know what bead rolling is, or have seen the machine that does it.

You're a man of many skills. I admire that very much. We used an old saying back in Iowa. "Don't judge someone by what they have, judge someone by what they don't need." Me thinks you don't need much. Very, very independent indeed. I had to hire a mobile welder to fix my frame.

David
__________________
WBCCI #8607
VAC Region 11

Link to my 1975 Overlander Improvement Journal:
https://www.airforums.com/forums/f17...ml#post2053792
dbj216 is online now   Reply With Quote
Old 08-11-2018, 02:22 PM   #37
3 Rivet Member
 
Joyflea's Avatar
 
1967 26' Overlander
Alpine , Texas
Join Date: Jul 2018
Posts: 154
Today we finished stripping the paint and vinyl off the last Al. panel . Just one end cap and some trim pieces left .
Only found two things of interest in the iner area . A mr raisin , mouse toy and a shipping slip for a panel .

Set up my scaffolding to clean of all the old caulk off the roof and put new ac and two new vents in place before I start sealing and trying to make it leak proof .

Latter , Blue .Click image for larger version

Name:	94C056E1-216A-4FD9-9CB0-D8954DA9A796.jpg
Views:	50
Size:	406.1 KB
ID:	319593

Click image for larger version

Name:	86A38258-66BC-4F2F-AEEC-DED086B42FA0.jpg
Views:	49
Size:	276.6 KB
ID:	319594

Click image for larger version

Name:	8859FCBE-0890-48F6-AF06-A9C97A3E98D7.jpg
Views:	48
Size:	259.1 KB
ID:	319595

Click image for larger version

Name:	3CC54950-B100-4EC4-A375-F135733E9A00.jpg
Views:	48
Size:	205.9 KB
ID:	319596

Click image for larger version

Name:	DDA931DC-DA2B-4776-AFBA-0F7903EB9DAF.jpg
Views:	54
Size:	214.3 KB
ID:	319597
Joyflea is online now   Reply With Quote
Old 08-18-2018, 08:46 AM   #38
3 Rivet Member
 
Joyflea's Avatar
 
1967 26' Overlander
Alpine , Texas
Join Date: Jul 2018
Posts: 154
Out with the old , in with the new

Bent up some 90 degree angles out of 3003 .063 to brace and to fill in holes from old ac . Ran it through the shrinker to match the roof curve . After rivets weíre instaled the roof was much stronger . Removed the front and rear power vents and cleaned all the sealer . What a pain .

Working off a scaffold with boards on ribs I installed the new ac and power vents . Still need to install tv antenna, but will have to wait till next week when my flexible solar panels get here to make sure everything fits . Got to finish all the holes and sealed so I can start insulation and wireing.

Thanks for watching , Blue .Click image for larger version

Name:	019AA6FE-77DB-4897-A8B9-D73BD3E3A8D1.jpg
Views:	38
Size:	225.0 KB
ID:	320176

Click image for larger version

Name:	05934757-5999-4607-B829-602AA3D21B5B.jpg
Views:	36
Size:	227.6 KB
ID:	320177

Click image for larger version

Name:	EBE07C9E-37F2-4DB0-8569-8535722F033D.jpg
Views:	34
Size:	233.5 KB
ID:	320178

Click image for larger version

Name:	05A76EE7-D5D0-4932-AF36-4C6C1FB158C5.jpg
Views:	38
Size:	252.3 KB
ID:	320179

Click image for larger version

Name:	92324AAB-CA05-4172-A095-C591A2BB4633.jpg
Views:	43
Size:	199.5 KB
ID:	320180

Click image for larger version

Name:	A05F7C48-01C3-417C-B4BE-BAF440DC8598.jpg
Views:	40
Size:	210.9 KB
ID:	320181

Click image for larger version

Name:	C5216C25-F704-43B2-A2E4-4E575005AF20.jpg
Views:	41
Size:	246.1 KB
ID:	320182

Click image for larger version

Name:	77B42FBD-3539-4D39-8908-344C586BA4B5.jpg
Views:	46
Size:	248.6 KB
ID:	320183

Click image for larger version

Name:	0EE0A214-FD30-4354-A2D8-7A30B329C25B.jpg
Views:	41
Size:	230.4 KB
ID:	320184

Click image for larger version

Name:	562ABA20-247F-4D02-A549-B2498A6254AF.jpg
Views:	40
Size:	190.8 KB
ID:	320185
Joyflea is online now   Reply With Quote
Old 08-18-2018, 07:21 PM   #39
Rivet Master
 
dbj216's Avatar

 
1986 34' Limited
1975 27' Overlander
Conifer , Colorado
Join Date: Jun 2009
Posts: 4,826
Images: 1
Wow, this is a top level renovation. You were right on when you said "I can fix that". Great job on the AC installation and curve fitting. Not easy.

I hear you on the roof vent sealant removal. I also had sealants of various types slobbered all around my windows. It took many hours of "pick'n and grin'n to get it off and a proper seam sealer applied.

I did the same "scaffolding" as you when installing my heavy AC. I used carpet and boards on the ribs with a piece of plywood between them to kneel on, and to place the AC while I positioned it over the hole. Not a real easy job with just one old man to do. You validated my method, thank you.

David
Attached Thumbnails
Click image for larger version

Name:	1412 Vent Front Sealant Shot-800x600.jpg
Views:	37
Size:	46.3 KB
ID:	320266   Click image for larger version

Name:	1412 Vent Front Cleaned (Small).jpg
Views:	39
Size:	55.7 KB
ID:	320267  

__________________
WBCCI #8607
VAC Region 11

Link to my 1975 Overlander Improvement Journal:
https://www.airforums.com/forums/f17...ml#post2053792
dbj216 is online now   Reply With Quote
Old 08-19-2018, 06:39 AM   #40
3 Rivet Member
 
Joyflea's Avatar
 
1967 26' Overlander
Alpine , Texas
Join Date: Jul 2018
Posts: 154
David , your right on the old man part . Be 70 on this next birthday .
The black stickyunder aluminum tape was the hardest to remove . Wish I knew where to find it , I would use some on the overlap . It would outlast me .

Blue
Joyflea is online now   Reply With Quote
Old 08-19-2018, 07:44 PM   #41
Rivet Master
 
dbj216's Avatar

 
1986 34' Limited
1975 27' Overlander
Conifer , Colorado
Join Date: Jun 2009
Posts: 4,826
Images: 1
Hey, we're the same age! I like being in the "top percentile" for age. It's the first time I've been in the top percentile in anything.

Keep on fix'n...

David
__________________
WBCCI #8607
VAC Region 11

Link to my 1975 Overlander Improvement Journal:
https://www.airforums.com/forums/f17...ml#post2053792
dbj216 is online now   Reply With Quote
Old 08-23-2018, 05:28 PM   #42
3 Rivet Member
 
Joyflea's Avatar
 
1967 26' Overlander
Alpine , Texas
Join Date: Jul 2018
Posts: 154
Xmas in August!

Solar system here . Will test fit maybe this weekend and decide where to drill holes for cables . Three panels,,300 watts. Blue

Click image for larger version

Name:	C5D3ACCD-6E9E-488C-AAA0-3C5CF9B32C55.jpg
Views:	41
Size:	263.3 KB
ID:	320661

Click image for larger version

Name:	A349A93D-D7FC-450E-9E8A-AEA1867F3C2D.jpg
Views:	43
Size:	258.3 KB
ID:	320662
__________________

Joyflea is online now   Reply With Quote
Reply

Tags
1967


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Seeking a 19-21 foot project trailer for Food Truck project debbooooo Airstream Classifieds 0 09-06-2016 01:00 PM
California project trailer - fix title now? kaulike Title, VIN & Registration 9 06-05-2012 04:48 PM
To fix or not to fix nayl Ribs, Skins & Rivets 16 07-17-2010 08:38 PM
1967 Airstream Overlander 27' Good Project, Polsihed! eBay Watch Airstreams on eBay 0 05-27-2009 03:40 PM
You Fix-You Camp-You Fix Some More juel Off Topic Forum 6 08-18-2005 07:50 AM


Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 08:36 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.