Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-19-2010, 09:32 AM   #365
Rivet Master
 
Aerowood's Avatar

 
1971 21' Globetrotter
Arvada , Colorado
Join Date: May 2006
Posts: 2,840
I have used a standard monel rivet MS20615(D)M(L) or stainless MS20613C(D)-(L) and just drilled a small hole in the end. I'd send you some but I'm not due back home until mid Sept.

(D) = Diameter
(L) = Length
__________________

__________________
Aerowood is offline   Reply With Quote
Old 08-19-2010, 07:16 PM   #366
Rivet Master
 
truckasaurus's Avatar

 
1960 33' Custom
Saskatoon , Saskatchewan
Join Date: Jun 2005
Posts: 1,181
Images: 25
Most interesting; I picked up some "Chicago screws" on my way home as a back up plan but I like the steel rivet idea.
__________________

__________________
1960 Sovereign 33' Pacific Railroad Custom
truckasaurus is offline   Reply With Quote
Old 08-20-2010, 05:43 AM   #367
Restorations done right
Commercial Member
 
Frank's Trailer Works's Avatar
 
1962 26' Overlander
1961 26' Overlander
Vintage Kin Owner
Currently Looking...
Baltimore , Maryland
Join Date: Aug 2007
Posts: 5,547
Images: 2
silly question... why do you want to put steel back if it is just going to rust? Why not use an aluminum or stainless one? I buy my rivets from two sources and one of them probably has a very good substitute, heck they probably have what you are replacing. Try Mc Master Carr or Jaycee Rivets.
Frank's Trailer Works is offline   Reply With Quote
Old 08-20-2010, 09:46 AM   #368
Rivet Master
 
Aerowood's Avatar

 
1971 21' Globetrotter
Arvada , Colorado
Join Date: May 2006
Posts: 2,840
Both of the steels I gave rivet numbers for are highly corrosion resistant and being he wants to use them as a hinge point highly resistant to wear.
__________________
Aerowood is offline   Reply With Quote
Old 09-13-2010, 08:35 PM   #369
Rivet Master
 
truckasaurus's Avatar

 
1960 33' Custom
Saskatoon , Saskatchewan
Join Date: Jun 2005
Posts: 1,181
Images: 25
3 days 'til snow

With a bit of luck (and minimal snow) we're just another two weekends work away from being able to tow the 'stream home for the winter!

I rebuilt the upper Jalousie windows and it went well except the upper and lower seals seem very different from anything on Vintage's website, still it looks great and I don't dread doing the lower window unit when I have the time.

So as an update we have:
-refurbished windows installed with all fresh seals
-the new birds mouth vent installed for connection to the grey tank
-all the running lights in
-new tail lights (7")
-new Airstream plaques
-Vulkem soup poured between the wheel wells and skin
-seams sealed
-Bumper re-POR'd and double top coated with metallic silver
-Tongue re-POR'd and double textured black topcoated
-Propane rack painted to match
-Marinco 110V inlet wired up with 10 gauge stranded
-front interior cap insulated and installed

Next on the list is to replace the front FF which has failed with a cracked frame and seal it up with PRC this time! Then fully insulate/ apply ice shield sound deadening, wire, install the inner wheel well liners and then remake a couple of interior skins and install them all. If I get this accomplished then it's just brakes and we're good to go.

The last image shows a rough taped layout which helped with a few design decisions. I've included it just to show the staggered cabinet layout on the right hand side which will be countertop height.
Attached Thumbnails
Click image for larger version

Name:	IMG_1841.jpg
Views:	93
Size:	62.2 KB
ID:	110726   Click image for larger version

Name:	IMG_1838.jpg
Views:	113
Size:	75.8 KB
ID:	110727  

Click image for larger version

Name:	IMG_1803.jpg
Views:	113
Size:	53.3 KB
ID:	110733  
__________________
1960 Sovereign 33' Pacific Railroad Custom
truckasaurus is offline   Reply With Quote
Old 09-13-2010, 10:29 PM   #370
2 Rivet Member
 
1968 20' Globetrotter
Kelowna , British Columbia
Join Date: Feb 2010
Posts: 78
Sorry I didn't see your post about the plumbing vent sooner....my plumber buddy suggested I use hot tub piping for my vent...multiple sizes and flexible.

Could you make another birdsmouth vent? I'd love to use that style.

The polish job is beautiful!

Maybe it won't snow Thursday...

Ian
__________________
Canlib is offline   Reply With Quote
Old 09-20-2010, 09:50 PM   #371
Rivet Master
 
truckasaurus's Avatar

 
1960 33' Custom
Saskatoon , Saskatchewan
Join Date: Jun 2005
Posts: 1,181
Images: 25
No problemo

Ian, next chance I get I'll make one or two up. I used 040 on mine but I think 032 will actually work better to conform to the skin.

This weekend saw all the wire installed, it took all the wire I had with just 2 or 3 feet left over. A 12V lighting circuit, 12V water heater control - water pump - cooktop, 12V FF's, 12V Vacuflush with a low voltage control line to the bathroom 110V Fridge and 110V outlets. I put a redundant line in for future solar or roof AC and the floor mounted AC and heater will be easy to wire up being adjacent to the batteries and panel.

We got a good shwack of the insulation in and both fiberglass end caps plus I replaced the front FF which had a hairline crack in it too. I PRC'd it this time and test ran them both, all good and they move loads of air.

Snow is expected tonight but should be gone by the weekend :-)
Attached Thumbnails
Click image for larger version

Name:	IMG_1850.jpg
Views:	95
Size:	209.6 KB
ID:	111327  
__________________
1960 Sovereign 33' Pacific Railroad Custom
truckasaurus is offline   Reply With Quote
Old 09-26-2010, 09:42 PM   #372
Rivet Master
 
truckasaurus's Avatar

 
1960 33' Custom
Saskatoon , Saskatchewan
Join Date: Jun 2005
Posts: 1,181
Images: 25
Big, Big step forward

An awesome weekend!

No snow just excellent working weather.. We got the insulation all in, the inner wheel wells lined with ice guard - insulated and installed, and all the interior skins back included a couple of new ones I made this week. We managed to get a shot of the elusive photo shy GF's father after he helped with holding up panels for Clecoing so I'm including it for posterity.

I also mounted the license plate light and replaced the passenger side window gutter as it was a cause of our last leak.

Ran a quick test of all the running lights and tested the FF's, all good.

So maybe a 1000 rivets down and few more to go then it's time to run the brake lines and bring her home for the fun part. I think today was a turning point and most of the grubby work is behind us :-)
Attached Thumbnails
Click image for larger version

Name:	IMG_1905.jpg
Views:	96
Size:	94.3 KB
ID:	111680   Click image for larger version

Name:	IMG_1940.jpg
Views:	89
Size:	31.4 KB
ID:	111681  

Click image for larger version

Name:	IMG_1945.jpg
Views:	157
Size:	57.7 KB
ID:	111682   Click image for larger version

Name:	IMG_1975.jpg
Views:	124
Size:	58.7 KB
ID:	111683  

Click image for larger version

Name:	IMG_1962.jpg
Views:	131
Size:	44.2 KB
ID:	111684  
__________________
1960 Sovereign 33' Pacific Railroad Custom
truckasaurus is offline   Reply With Quote
Old 09-26-2010, 09:51 PM   #373
Rivet Master
 
pbearsailor's Avatar

 
1957 22' Caravanner
Port Hadlock , Washington
Join Date: Dec 2008
Posts: 863
Looking really good, Truck! Going to be much more fun from here on with most of the messy stuff done.

cheers,
steve
__________________
Forum Thread: First She Had to Take a Ride on a Boat

Blog: My 57 Caravanner
pbearsailor is offline   Reply With Quote
Old 09-26-2010, 11:36 PM   #374
Rivet Master
 
nmbosa's Avatar
 
1959 26' Overlander
Nowhere , Washington
Join Date: Dec 2008
Posts: 572
Congratulations on a good summer of work. Can't wait to see what you do with the interior.
Norm
__________________
Norm and Mary
blog: Captain Wilson's Overlander
nmbosa is offline   Reply With Quote
Old 09-27-2010, 07:08 AM   #375
Rivet Master
 
Minno's Avatar

 
1972 31' Sovereign
Lexington , Minnesota
Join Date: Feb 2009
Posts: 3,323
Quote:
Originally Posted by truckasaurus View Post
-Vulkem soup poured between the wheel wells and skin
Wow - looks great Truck! Can you expand on the Vulkum soup you mentioned on 9/13? I think you may have solved a problem I've been pondering, how to seal the wheel wells to the skin better. Did you mix the vulkum with something to make it pourable?

Chris
__________________
Minno is offline   Reply With Quote
Old 09-27-2010, 06:26 PM   #376
Rivet Master
 
truckasaurus's Avatar

 
1960 33' Custom
Saskatoon , Saskatchewan
Join Date: Jun 2005
Posts: 1,181
Images: 25
Chris

Aerowood gave me the idea, I decanted a tube of Vulkem in a pot and mixed in mineral spirits until I got a milkshake like viscosity. I used 3 tubes in all for the wheel wells which was slight overkill. I just used a scrap piece of aluminum to make a broad 1/2 funnel and poured away!

In theory it shouldn't be required as the exterior skin is sealed to the wheel well wall but I'm all for keeping the elements out especially where you won't find a problem until it's too late. A week later and it has set up perfectly. I also sprayed the outside of the wells with rubberized undercoating and continued up to the trim piece too.
__________________
1960 Sovereign 33' Pacific Railroad Custom
truckasaurus is offline   Reply With Quote
Old 09-27-2010, 06:35 PM   #377
Site Team
 
Aage's Avatar
 
1974 31' Sovereign
Ottawa , ON
Join Date: May 2008
Posts: 11,204
Images: 25
Quote:
Originally Posted by truckasaurus View Post
Snow is expected tonight but should be gone by the weekend :-)
You folks have sure had more than your fair share of rotten weather this year, from what a friend out there tells me.

Hopefully you will have an easier winter.
__________________
“Courage is being scared to death, but saddling up anyway.”
...John Wayne...........................
Aage is offline   Reply With Quote
Old 10-17-2010, 09:12 PM   #378
Rivet Master
 
truckasaurus's Avatar

 
1960 33' Custom
Saskatoon , Saskatchewan
Join Date: Jun 2005
Posts: 1,181
Images: 25
moving into high gear

A big weekend. We 99% finished up the interior rivets and hooked up the umbilical. (How a professional manages to install an umbilical with 4 of the 7 color coded wires located incorrectly is quite beyond my comprehension).

But we towed her home, without brakes, just fine and now we have her stored 2 minutes away from home ready for the intense winter of interior work. We're going to have to trouble shoot the Actibrake system and possibly just take it to a pro at some point.

The bath tub 24" x 36" arrived this week and we splurged and ordered:
- Dometic Sealand marine vacuum system black tank
- Dometic marine vacuum toilet 5000 model
- Hepvo waterless valves (high tech P traps x 3)
- Isotherm marine refrigerator/ freezer unit
- PrecisionTemp Showermate water heater (the stainless steel marine version).

So we should be getting to the good part very soon.

The drive home was great and I can't wait for California in the summer.
Attached Thumbnails
Click image for larger version

Name:	IMG_1989.jpg
Views:	93
Size:	259.1 KB
ID:	113318  
__________________

__________________
1960 Sovereign 33' Pacific Railroad Custom
truckasaurus is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
factory new shell- 2007 Classic? boondockdad 2006 - 2010 Classic (all lengths) 18 09-04-2014 08:39 PM
How big a shell off has been done? tbrom Repairing/Replacing Floor &/or Frame 1 10-12-2006 10:45 AM
Shell on or off??? Bradjun1 Repairing/Replacing Floor &/or Frame 3 09-20-2006 12:19 AM
Shell Off vs Shell On Summary mbatm01 Repairing/Replacing Floor &/or Frame 82 01-09-2006 06:46 PM
Replacing the shell ?? William8979 Repairing/Replacing Floor &/or Frame 2 05-11-2005 09:22 AM


Virginia Campgrounds

Reviews provided by




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 12:34 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.

Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.