Originally Posted by frankfarmer
I've got a big job to do.
1992 34 ft. Limited. Toilet area is gone/rotten. I've got to cut out & replace all, 3 ft by 2 ft. section that goes under rear bulkhead, install new toilet.
Questions if you can help. What are the frame support distances apart??? Presume them are metal? Presume frame distances are all the same on all models?
Thanks for any advise from any member.
Mine were about 24" apart. I think they vary from front to back. Mine also had a center brace between two cross braces. You can tell where the frame rails are by removing the floor covering and looking for the screws. holding the floor to the frame. Yes, they are metal.