The dinette leg in my 2014 FC 30' was causing an indentation on the floor. The floor is not real wood, but some soft vinyl type material and the dinette leg comes to rest on it causing an indent.
I seem to recall another post about this subject but the search feature is worthless.
So I got one of those wall plates used to protect walls from door knobs at Walmart. Seemed thin and sturdy enough to protect the floor.
Anyone else run into this? What did you do?
__________________ 2014 Airstream Flying Cloud 30 Recliner - WBCCI #4850 - AIR #110821 2018 Nissan Armada SL Tow Vehicle, Equal-i-zer Hitch Visit Our Flying Cloudblog for my latest adventure!
I thought about the soft pads. But then I figured it'd need to be something hard to prevent a dent. I'm not crazy about the look of what I used though.
__________________ 2014 Airstream Flying Cloud 30 Recliner - WBCCI #4850 - AIR #110821 2018 Nissan Armada SL Tow Vehicle, Equal-i-zer Hitch Visit Our Flying Cloudblog for my latest adventure!
. . .
I seem to recall another post about this subject but the search feature is worthless.
. . .
The basic search function is not good, but there are ways around it. Post 9 in the following thread has some hints about the routes to better searching. Also, it is important to check "show posts" and not "show threads" if given the option on this site.
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.