Reply
 
Thread Tools Search this Thread Display Modes
 
Old 09-18-2011, 09:16 PM   #1
2 Rivet Member
 
1969 31' Sovereign
O , Central,Florida.
Join Date: Dec 2008
Posts: 30
1969 'C' Frame Channel is there a supplier

Howdy Y'all!

I am In th middle of a rear bath fix on my 1969 Land Yacht & I was wondering is there a supplier that make the stuff I need?

I was thinking of cutting a slice off & taking it to the local welding / fabrication shop & see if they can make it for me but before I do I was looking for any & all advice on what to do & what not to do.

I wanna get this floor back in before it gets cold.

Yes Virginia it get cold here in Florida maybe I won't be shoveling snow but is did sprinkle a bit of that white stuff last year.

Thank You all very much!

SR66

PS pictures & stuff so far


http://www.airforums.com/forums/f36/...out-78002.html

http://www.airforums.com/forums/f443...his-82279.html
__________________

__________________
Slowride66 is offline   Reply With Quote
Old 09-20-2011, 02:42 PM   #2
Tool Hoarder
 
Currently Looking...
West , California
Join Date: May 2010
Posts: 907
Images: 3
You are talking about the floor channel correct? If so you can make it yourself if you have a sheet metal break.
__________________

__________________
marzboy is offline   Reply With Quote
Old 09-21-2011, 09:08 PM   #3
2 Rivet Member
 
1969 31' Sovereign
O , Central,Florida.
Join Date: Dec 2008
Posts: 30
The Frame Rails.

I took a slice to the local welding place & they said it was 11 gage metal & it would be about $100,00 for Two 8' pieces . that is as long as their break is.


SR66
__________________
Slowride66 is offline   Reply With Quote
Old 09-22-2011, 10:18 AM   #4
Tool Hoarder
 
Currently Looking...
West , California
Join Date: May 2010
Posts: 907
Images: 3
Ok gotcha. I believe my 65 was 12 ga cold roll. I had to fabricate some to repair the rear section of my trailer.
__________________
marzboy is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How can a bent frame be fixed? Eagle & Bear Repairing/Replacing Floor &/or Frame 7 03-02-2012 12:48 PM
Can I just spray the frame with undercoating? robwok Repairing/Replacing Floor &/or Frame 5 12-01-2011 11:25 AM
C channel bolts? Phrunes Repairing/Replacing Floor &/or Frame 11 06-12-2011 10:14 PM
frame reinforcement - rear end separation silversafari Repairing/Replacing Floor &/or Frame 1 03-17-2011 11:16 AM
The frame is ok ~ Patching the floor. LawChick Repairing/Replacing Floor &/or Frame 12 01-30-2011 03:39 PM


Virginia Campgrounds

Reviews provided by




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 09:29 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.

Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.