Can screws be used in place if rivets? Is there anything to bite to? I thought I should use bigger rivets but it just looks like there is nothing to bit to
Can screws be used in place if rivets? Is there anything to bite to? I thought I should use bigger rivets but it just looks like there is nothing to bit to
A photo would help.
Screws become loose when they are subjected to vibration.
Sorry pic didn't take . It's a 94 airstream landyacht 33 ft motorhome . It's the rivets under the awning on the transition piece .what does the rivet bite on under the fiberglass outside?
Yes I bought the 1/4 rivets and repaired the side rivets .but the rivets on the topside .they look like there is nothing to go into .should there be metal on top too?
Yes, there should be metal to bite into. If not, then your steel rails are rusted out. You may need to seal the existing holes and drill new holes to secure the end cap.
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.