What is the metal sub-floor made of?

[Keyair]

Gloran:
Stunning!
Extreme?
No, just very nicely done... you just set the bar for me!
Great Job!
What paint did you use?
Did you spray it??


Smartstream:
Awesome info on that little box!
I saw the same on mine and thought it was the Door Bell, Until I found the real doorbell under the sofa!

[gloran]

Keyair,I used all Rust-Oleum oil based paint. I tried spraying and didn't think it worked well getting into all the cracks and opening, plus hard to control and get can in right position. What worked the best was a longer handle 3" roller,(they usually come with a foam roller cover with about 1"diameter) I replaced the foam cover with a longer nap 3"replacement cover same size as the foam cover,that and a assortment of brushes from 1"to 3" mostly 1" with a wooden handle taped onto the brush handle, that enabled me to reach farther,that helped alot.Any ways it was a challenge,only good thing is you get to spend alot of time on your back. Thanks for the compliment. Randy

[Keyair]

Oh, Cool...
I did my truck with Rustoleum and a roller....
You be the judge...
Before...


In Progress....



A little spit and polish...

[gloran]

Big difference, looks alot better. Amazing what a little paint will do.

[Keyair]

Which Rustoleum did you use?

[gloran]

The Rust-Oleum was high performace oil base. The black I used was flat and the aluminum was gloss. I thought the high gloss in the black would look a little over done for the bottom of a MH, the sheen from the flat black turned out about right.