|
|
05-29-2014, 04:07 PM
|
#1
|
Rivet Master
1979 24' Airstream Excella 24
Tipp City
, Ohio
Join Date: Feb 2012
Posts: 551
|
6 gal water heater with heat exchanger?
I am getting ready to order a new water heater for my MH. I noticed that you can get a 6 gal Atwood that appears to be the same size and shape as the original that has a heat exchanger that circulates engine coolant thru the water heater and heats the water as you drive. Seems kike a good idea. When you arrive at your destination you have hot water. Does any one have any first hand experience with such a system? Does the engine water pump have sufficient flow to operate the system? Are there other drawbacks?
|
|
|
05-29-2014, 04:12 PM
|
#2
|
Rivet Master
2014 27' FB Eddie Bauer
Chelsea
, Michigan
Join Date: May 2010
Posts: 1,792
|
I know MH folks who have them and love them.
__________________
Bob Martel
WBCCI# 5766
|
|
|
05-29-2014, 04:29 PM
|
#3
|
Rivet Master
Currently Looking...
1995 36' Classic 36
Ludington
, Michigan
Join Date: May 2011
Posts: 1,662
|
Mine works well. It's hooked in line (or series) with the heater. No additional load on the engine water pump. I'm not sure if there is a bypas valve to keep the water temp from getting too hot.
I wish mine had and electric element also. Cheaper (free) and quieter than propane.
|
|
|
05-29-2014, 05:32 PM
|
#4
|
Rivet Master
Currently Looking...
_
, _
Join Date: Mar 2008
Posts: 2,385
|
When I replaced my water heater a couple yrs back, I guess I got the "fancy" Atwood. It is propane, electric and it has the engine coolant heating tube. The reason I got this one is that it also has the electronic start. Propane or electric heat up the water fairly quickly...I turn both on when I'm in a really big hurry!
This is just my personal feeling, but here goes...I have no plan to ever hook up the engine coolant tube. It is just one less water leak issue to deal with and I would never want to see a coolant leak in the galley and spread from there. It was a lot of work installing laminate flooring and carpet! . Again, just my personal preference.
__________________
May a Firefly land upon your shoulder
and bring you good luck, good fortune, and abundance.
|
|
|
05-29-2014, 05:46 PM
|
#5
|
Rivet Master
Currently Looking...
_
, _
Join Date: Mar 2008
Posts: 2,385
|
Also was going to say, having the electric is nice. At the "ranch" property, we have full hookups and other then our yearly assessment payment, we only pay a small extra fee for electricity if we want to leave the RV plugged in while not there. So it's nice to not be using the propane up.
We do have a propane "filling station" at the property and basically sell it at coat to owners. Better then a round trip into town and back...80 miles. I'm rolling my eyes to myself at the moment though...in a good polite way...there are only two maintenance guys that I ask when I get propane. The others don't get it that the propane tank on the MH is not removable. They always say to just drop of my tanks and come back later. Even after the explanation, there is still a puzzled look on their faces. And of course it's a major pain to disconnect and drive over to the propane tank. Again I really like having the electric element!
__________________
May a Firefly land upon your shoulder
and bring you good luck, good fortune, and abundance.
|
|
|
07-15-2014, 04:10 PM
|
#6
|
3 Rivet Member
1978 31' Excella 500
Currently Looking...
SOUTH ANHERST
, Ohio
Join Date: Sep 2009
Posts: 174
|
New to HOT WATER TANK replacement , I purchased a 1975 Argosy that had the copper pipes cut that went to the old water tank .
here is what I have 2 pipes coming from the rear or the trailer and cut right before thay were hooked up to the water tank and a cut pipe on the floor in front of the water tank only One Pipe leading to the front for the fresh water tank .
Here is my question the two pipes comeing from the rear that were cut do they go into the hot water tank and how would I connect the pipe leading to the front of the camper that gos to the fresh water tank? would like some photos on a hot water tank hooked up as I my be able to figure out were these pipes go .
Were removed before I purchased the trailer?????????? need help ASAP have new hot water tank but do not know how pipes are to be hooked up ??
|
|
|
07-18-2014, 07:49 PM
|
#7
|
Rivet Master
1989 34.5' Airstream 345
Saint Petersburg
, Florida
Join Date: Apr 2010
Posts: 1,702
|
Quote:
Originally Posted by Gosman
New to HOT WATER TANK replacement , I purchased a 1975 Argosy that had the copper pipes cut that went to the old water tank .
here is what I have 2 pipes coming from the rear or the trailer and cut right before thay were hooked up to the water tank and a cut pipe on the floor in front of the water tank only One Pipe leading to the front for the fresh water tank .
Here is my question the two pipes comeing from the rear that were cut do they go into the hot water tank and how would I connect the pipe leading to the front of the camper that gos to the fresh water tank? would like some photos on a hot water tank hooked up as I my be able to figure out were these pipes go .
Were removed before I purchased the trailer?????????? need help ASAP have new hot water tank but do not know how pipes are to be hooked up ??
|
Gosman,
You're in the Motorhome section of AirForum. Don't know if you'll get too many responses here to your question.
|
|
|
07-18-2014, 07:52 PM
|
#8
|
Rivet Master
1989 34.5' Airstream 345
Saint Petersburg
, Florida
Join Date: Apr 2010
Posts: 1,702
|
Quote:
Originally Posted by Gregsch
I am getting ready to order a new water heater for my MH. I noticed that you can get a 6 gal Atwood that appears to be the same size and shape as the original that has a heat exchanger that circulates engine coolant thru the water heater and heats the water as you drive. Seems kike a good idea. When you arrive at your destination you have hot water. Does any one have any first hand experience with such a system? Does the engine water pump have sufficient flow to operate the system? Are there other drawbacks?
|
Hi,
Love the heat exchanger in mine. Dadstoy has pointed out the biggest concern with having the heat exchanger. In mine, there's about 70 feet of heater hose that would have to be replaced when it's time for replacement. I've camped a few times before realizing that I had heat exchanger. It's really nice NOT to have to turn on hot water heater until next day at camp.
I will say this, I do plan on converting mine to also have 120v heater element installed.
And yes, I do plan on keeping aux heater and heat exchanger on hot water heater. Hoping for an Alaska trip next summer, have a feeling, I may need aux heater once I get further north......
|
|
|
07-18-2014, 10:00 PM
|
#9
|
Rivet Master
1974 Argosy 20
2014 20' Flying Cloud
Kooskia
, Idaho
Join Date: Jul 2009
Posts: 4,591
|
The heat exchanger in my now gone '83, 310 worked as advertised, made hot water while you had the engine running. Very hot water in fact, almost dangerously hot. I didn't consider it a great asset though, propane works well for me.
|
|
|
07-18-2014, 11:28 PM
|
#10
|
Rivet Master
2012 25' FB Eddie Bauer
Vintage Kin Owner
Virginia Beach
, Virginia
Join Date: Sep 2004
Posts: 7,801
|
My former Airstreams had propane only water heaters, the new one has electric and propane. I really like having that choice - but having propane only wasn't a real problem. I do live in Virginia where winter normally lasts 5-8 weeks, but I can turn off the water heater and have at least warm water for 12 to 15 hours!
Plus, with propane six gallons will heat within 10 minutes on propane, 15 to 20 minutes. Both should be seven minutes or less. Seems like it's just one more thing to break... and solve something that isn't really a problem.
Paula
__________________
Today is a gift, that's why they call it the present.
|
|
|
07-19-2014, 01:28 PM
|
#11
|
3 Rivet Member
1978 31' Excella 500
Currently Looking...
SOUTH ANHERST
, Ohio
Join Date: Sep 2009
Posts: 174
|
Thanks new to web do not get on much ; will try and get on the right site here on the fourm.
Thanks again
|
|
|
07-20-2014, 07:17 PM
|
#12
|
Rivet Master
1979 24' Airstream Excella 24
Tipp City
, Ohio
Join Date: Feb 2012
Posts: 551
|
I bought the water heater with all three sources of heat. I intend to hook up the heat exchanger. I am just finishing a major floor repair, should install the waterheater in a week or so. Crazeevw; what kind of hose did they use to supply antifreeze to the heat exchanger?
|
|
|
07-24-2014, 09:12 AM
|
#13
|
2 Rivet Member
1986 34.5' Airstream 345
topeka
, Kansas
Join Date: Mar 2011
Posts: 82
|
me too
Quote:
Originally Posted by Dakota
Mine works well. It's hooked in line (or series) with the heater. No additional load on the engine water pump. I'm not sure if there is a bypas valve to keep the water temp from getting too hot.
I wish mine had and electric element also. Cheaper (free) and quieter than propane.
|
love mine wish it was electric too
__________________
“The world is a book and those who do not travel read only one page.” – St. Augustine
|
|
|
11-29-2014, 09:22 AM
|
#14
|
Rivet Master
1989 34.5' Airstream 345
Ebro
, Fla Panhandle
Join Date: Jul 2013
Posts: 1,212
|
So glad to find this thread. Just completed installing a new Atwood water heater.
It is gas , electric, and engine heated.
Surprising to see that the pipe from the engine cooling water on the heater is just welded to the outside of the tank and heats with heat transfer thru the skin of the tank.
My challenge is the electric supply to the heater. I pick up power for the heater at the main power box. Just tied into an existing breaker there. But the heater is too large a draw and keeps flipping it off.
Has anyone found a way to add a breaker into the main electrical box, its so crowded I'm not sure how to make one fit. Please post pics if you have made this happen.
Cheers Richard
|
|
|
11-29-2014, 03:27 PM
|
#15
|
Rivet Master
Currently Looking...
1995 36' Classic 36
Ludington
, Michigan
Join Date: May 2011
Posts: 1,662
|
That's a dilemma! I need some sort of a prioritized load center. Something that would disconnect the hot water element if the load maxed.
|
|
|
11-29-2014, 03:47 PM
|
#16
|
Rivet Master
2012 25' FB International
Trent Woods
, North Carolina
Join Date: May 2013
Posts: 3,120
|
My boat had an Atwood 6 gal with engine heat exchanger and electric..worked fine for the 16 years I had the boat. Makes sense that a MH would have a heat exchanger in it...free hot water.
Larry
|
|
|
11-29-2014, 06:59 PM
|
#17
|
Rivet Master
Currently Looking...
1989 34.5' Airstream 345
Cleveland
, Tennessee
Join Date: Jul 2007
Posts: 787
|
I love mine. It's great to take a hot shower after a long drive. It also makes it easier to do dishes after stopping for lunch during the trip.
Gregsch: If you haven't done it yet, my MH uses copper line from engine to area of water heater. It looks a lot like the thinner walled rolled copper tubing. They are connected by flexible heater hose that is common for autos.
tevake: I plan on getting the electric also version should I have to replace my current water heater. For the power i was going to tap off the isolated circuit that runs the 2nd A/C unit off the generator. There would also be a switch box that would automatically disconnect the generator when plugged in at a campsite. This circuit would be plugged into the extra 20 amp. This way I don't overload the 30 amp main circuit and would be able to keep the water hot at all times. Unless it's so hot I need both A/C's. I imagine there would have to be a switch between A/C and heater, but haven't given that much thought yet. Still dreaming/ planning ahead for that day.
__________________
"Sometimes I wonder if the world is being run by smart people who are putting us on, or by imbeciles who really mean it." Mark Twain
AIR 22749 WBCCI 2349 NOVA TAC TN-6
1989 345 LE Classic Motorhome
|
|
|
11-30-2014, 05:56 AM
|
#18
|
Rivet Master
2016 Interstate Grand Tour Ext
Wildwood
, Florida
Join Date: Oct 2009
Posts: 1,236
|
Quote:
Originally Posted by 3 Dog Nite
Gregsch: If you haven't done it yet, my MH uses copper line from engine to area of water heater. It looks a lot like the thinner walled rolled copper tubing. They are connected by flexible heater hose that is common for autos.
|
Ricki, Sounds like your install was re-done post factory. My came with rubber radiator hose (1"?) going all the way back to the hot water heater and heat auxiliary exchanger under the aft bench seat. I disconnected mine where it splits of the engine. Basically ran a hose from the output to the return isolating the engine. I was afraid of leaks in the 23 year old hose!
__________________
Dave and Felicia
|
|
|
11-30-2014, 11:36 AM
|
#19
|
Rivet Master
1979 24' Airstream Excella 24
Tipp City
, Ohio
Join Date: Feb 2012
Posts: 551
|
tevake, My project has stalled temporarily but, I have finished the electric connections and the hot and cold connections. I have not fired it up yet but I assume it will work fine this way. My electric panel had several open spaces in the panel so I just added a dedicated breaker. I did a search on e-bay for the breaker needed and sure enough there were several listings for old used breakers that fit my 1979 breaker panel. If you do not have a open space for an additional breaker try searching for a 1/2 size breaker. I have done this on other projects. You just remove one full size breaker and replace it with two 1/2 size breakers.
|
|
|
11-30-2014, 01:16 PM
|
#20
|
Rivet Master
1979 24' Airstream Excella 24
Tipp City
, Ohio
Join Date: Feb 2012
Posts: 551
|
This is a picture of the breaker panel in my shop. Several times I have added circuits. See the small breakers on the left. They are 1/2 size breakers used to gain space when adding circuits. Be forewarned the manufacturer knows what you are doing with them, and how few other options you have, so they are priced accordingly. Expect to pay 5 times as much for the thin breakers.
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|