Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-16-2011, 11:05 PM   #43
2 Rivet Member
 
1984 31' Airstream310
Boise , Idaho
Join Date: May 2011
Posts: 62
Quote:
Originally Posted by pdallas View Post
Welcome to the club! 97 Money pit is a bit harsh, but probably most accurate!

What was the brand and part number on the heater controll valve you used?

Good luck,

PD
I believe I threw the box away with the part number, but I will double check. I picked it up at Car Quest Parts. It is identical to the original....only plastic. I was not able to find a metal one like the OEM.
__________________

__________________
97sx is offline   Reply With Quote
Old 06-17-2011, 02:44 PM   #44
2 Rivet Member
 
1984 31' Airstream310
Boise , Idaho
Join Date: May 2011
Posts: 62
New mirrors. Went for a drive yesterday, and they have nearly twice the field of view compared to what was on before.
Attached Thumbnails
Click image for larger version

Name:	2011-06-15_17-03-51_197.jpg
Views:	79
Size:	169.8 KB
ID:	132670  
__________________

__________________
97sx is offline   Reply With Quote
Old 06-17-2011, 02:48 PM   #45
2 Rivet Member
 
1984 31' Airstream310
Boise , Idaho
Join Date: May 2011
Posts: 62
Started the process of stripping the clearcoat. Going to remove all of the clearcoat and decals. Then I am going to seal this unit up tight once and for all before we start the interior remodel.

I am probably going to give it a little shine for this season and then I plan to bring it to a mirror finish next spring.
Attached Thumbnails
Click image for larger version

Name:	2011-06-16_20-04-40_912.jpg
Views:	85
Size:	150.2 KB
ID:	132671  
__________________
97sx is offline   Reply With Quote
Old 06-17-2011, 08:48 PM   #46
Jamie
 
jking's Avatar
 
1984 31' Limited
1983 31' Airstream310
Oriental , North Carolina
Join Date: May 2004
Posts: 180
Good looking coach, 97sx! While you;re checking things out have a good look at the transmission fluid level (hot, and level). It might not be too much to look at the transmission filter if the mileage is over 70-80K or so. We just had a tranny failure because we didn't look!
__________________
jking is offline   Reply With Quote
Old 06-30-2011, 01:21 PM   #47
2 Rivet Member
 
1984 31' Airstream310
Boise , Idaho
Join Date: May 2011
Posts: 62
Quote:
Originally Posted by jking View Post
Good looking coach, 97sx! While you;re checking things out have a good look at the transmission fluid level (hot, and level). It might not be too much to look at the transmission filter if the mileage is over 70-80K or so. We just had a tranny failure because we didn't look!
Thanks! The tranny is two years old and only has a couple hundred miles on it. The gasket was leaking terribly so we just changed that out. Fluid looked great so I didn't change it.
__________________
97sx is offline   Reply With Quote
Old 06-30-2011, 01:44 PM   #48
2 Rivet Member
 
1984 31' Airstream310
Boise , Idaho
Join Date: May 2011
Posts: 62
So we have been cranking away this week.

Put on a set of Hedman headers. Went with the cheap set. On a budget and couldn't justify the ceramic coated ones. Man they went on easy! The sheet metal cover on the passenger side was damaged so I decided not to put it back on. Figured more air to the engine is probably an ok thing. Pulling all of the smog equipment off as soon as I can figure out what belt I am going to need once things are removed.

Found a set of Bilstein front shocks locally that were basically 2 for one. Couldn't beat the price so I put them on.

Installed brake pads the whole way around. Still planning to bring the coach by a shop and have the master cylinder, rotors, and calipers looked at by a professional.

Tore up all the carpeting and plywood subfloor in the cockpit. Going to have a couple guys bid the job to refloor the entire unit.

The coach is completely stripped of clearcoat. This weekend I plan to start resealing the entire exterior.

Had the dash AC recharged and it's still not working. So I am affraid I will have to bring it into a shop.

I have stripped most everything in the kitchen that once had the vinyl wood look and now it is stainless. Including the bathroom door. I attached a pic.

Added water to the tanks and started turning on the sinks. I had leaks everywhere! Most appears to have only been loose fittings. A little tightening and some plumbers tape has cured that except in the shower. It appears to be a whole different animal.
Attached Thumbnails
Click image for larger version

Name:	2011-06-26_22-22-18_62.jpg
Views:	76
Size:	149.6 KB
ID:	133634  
__________________
97sx is offline   Reply With Quote
Old 06-30-2011, 03:03 PM   #49
Rivet Master
 
Keyair's Avatar

 
1984 34.5' Airstream 345
Foothill Ranch , California
Join Date: Mar 2010
Posts: 3,930
Images: 1
Is your AC still running r12?
Start by getting a gauge set... like from harbor freight, and see what the pressures are.
__________________
My name is Steve.... and I am an Alumaholic!
Working in my Garage is like playing TETRIS with Tools!
Keyair is offline   Reply With Quote
Old 06-30-2011, 03:42 PM   #50
2 Rivet Member
 
1984 31' Airstream310
Boise , Idaho
Join Date: May 2011
Posts: 62
Quote:
Originally Posted by Keyair View Post
Is your AC still running r12?
Start by getting a gauge set... like from harbor freight, and see what the pressures are.
Still on the R12. Had it recharged by a guy at a local radiator shop. $70 a pound and it was nearly empty...so that was $210 plus $35 for the service. My neighbor ran my RV down that day because I got caught up at work. I wanted everything double checked for leaks since the refrigerant was nearly gone. They said everything looked great.

Well it ran cool to begin with and now it blows luke warm. I am running the RV down tomorrow morning and going to have them hook up the guages and check things over.

The clutch is engaging and the blowers are working its just not cold.
__________________
97sx is offline   Reply With Quote
Old 06-30-2011, 05:33 PM   #51
Moderator
 
DKB_SATX's Avatar

 
2017 26' Flying Cloud
1976 Argosy 28
Alamo Heights , Texas
Join Date: Aug 2006
Posts: 6,400
Images: 1
Blog Entries: 7
"AC recharged by radiator guy" could be your problem... if there's too much freon in the system you won't get enough expansion to cool, and if you were getting SOME cooling before and none now (after adding a lot of freon) I'm guessing an AC shop may just have to pull it down to the right amount. If they don't know exactly what the amount is, I think experienced people can get a good guess when it's right based on the pressures and temps the system produces in operation.
__________________
— David

Zero Gravitas — 2017 Flying Cloud 26U | Il Progetto — 1976 Argosy 28 Center Bath | WBCCI# 15566

He has all of the virtues I dislike and none of the vices I admire. — Sir Winston Churchill
DKB_SATX is offline   Reply With Quote
Old 07-01-2011, 11:40 AM   #52
Rivet Master
 
Keyair's Avatar

 
1984 34.5' Airstream 345
Foothill Ranch , California
Join Date: Mar 2010
Posts: 3,930
Images: 1
I wish we lived closer... I could help you with this!
One of my recent purchases...
__________________
My name is Steve.... and I am an Alumaholic!
Working in my Garage is like playing TETRIS with Tools!
Keyair is offline   Reply With Quote
Old 07-01-2011, 03:44 PM   #53
Full Timers/Diesel power.
 
Mike Leary's Avatar
 
1983 31' Airstream310
Cactus Hug , Arizona
Join Date: Mar 2007
Posts: 2,540
Images: 11
I want you guys to ramp-up these "little projects", I'd like meet you all at the mo/ho rally before they take my keys away!
__________________
"A settled wisdom, plus the itch to be elsewhere"
Mike Leary is offline   Reply With Quote
Old 07-07-2011, 11:53 PM   #54
2 Rivet Member
 
1984 31' Airstream310
Boise , Idaho
Join Date: May 2011
Posts: 62
Started the flooring project. Laid new subfloor in most of the cockpit. Tore out all of the original tile. Sealed up the subfloor. Then started laying the new flooring. I will post some pics of the progress.
__________________
97sx is offline   Reply With Quote
Old 07-08-2011, 12:35 AM   #55
2 Rivet Member
 
1984 31' Airstream310
Boise , Idaho
Join Date: May 2011
Posts: 62
Old tile and carpet.
Attached Thumbnails
Click image for larger version

Name:	2011-07-06_22-02-53_608.jpg
Views:	60
Size:	198.8 KB
ID:	134226   Click image for larger version

Name:	2011-07-06_22-03-26_513.jpg
Views:	67
Size:	201.5 KB
ID:	134227  

__________________
97sx is offline   Reply With Quote
Old 07-08-2011, 12:36 AM   #56
2 Rivet Member
 
1984 31' Airstream310
Boise , Idaho
Join Date: May 2011
Posts: 62
New subfloor. Sealed with primer and latex paint.
Attached Thumbnails
Click image for larger version

Name:	2011-07-06_22-03-35_294.jpg
Views:	68
Size:	171.7 KB
ID:	134228   Click image for larger version

Name:	2011-07-06_22-04-24_552.jpg
Views:	71
Size:	154.0 KB
ID:	134229  

__________________

__________________
97sx is offline   Reply With Quote
Reply

Tags
1985, 310 limited, motorhome


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Our '83 Limited restoration project arodriguez60 Interior Restoration Forum 17 10-13-2012 09:51 PM
310 Motorhome Rear Wheel Removal steveturk Classic Motorhomes 4 04-14-2011 06:50 PM
1984 310 habbs Classic Motorhomes 1 03-09-2011 06:23 AM
Limited glh101282 2006 - 2010 Classic (all lengths) 3 02-10-2011 10:12 AM
84 310 balljoints/brakes mick32 Classic Motorhomes 7 01-21-2011 10:36 PM


Virginia Campgrounds

Reviews provided by




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 04:19 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.

Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.