The wife is gonna let me do it... We're on our way to the dealer tomorrow morning to sign the papers on a new 2005 19' Bambi CCD! I'll owe on the trailer for a good few years, I'll owe my wife much more!!
So, here's a general question (sorry we're nubies): Can anyone offer some pointers on what to look for and check on a general final inspection prior to accepting the AS? I'm looking for any specific points or items your experts might have to offer for me to check and make sure in its in working order. Anything you suggest the dealer demo right on the spot to verify it's working order, etc.
We're also getting the Equalizer hitch installed too, so any pointers on what to verify on this item would also be appreciated.
I guess if I find any issues, the dealer will have time to work on it before we actually take it home, since my wife and I will be out of the country until later this month. Too bad... I want to take her out on a maiden voyage so badly!!
When we bought our 28' CCD earlier this year, the dealer suggested that we (me) stay in it overnight at their facility. They have full hookups for 5 or 6 units. If yours offers this, I'd highly recommend taking advantage of it.
When I got there, the trailer was in the service department where it had been cleaned an waxed. A technician showed me how to use the various appliances, water pump, etc. I was asked to look over the trailer and note anything that needed addressing while it was in their service area. I found a few minor problems and they were fixed immediately. The trailer was towed out to a pad and I was shown how to use the jack, leveling jacks, hookup electricity, water, sewer, etc.
That night, as I stayed in the trailer, I looked for any problems and tried to test every thing possible. Anything mechanical or anything that opens/closes was tested. I found a few windows that were difficult to open and needed 'tweaking'.
The next morning, a technician either explained how something worked or fixed what didn't. He then showed me how to dump the tanks, etc and get it ready for traveling.
Since it was February, he also winterized it and explained to me how to at the same time.
Another gentleman showed me how to hook the trailer to the hitch, and then did a test drive with me in my vehicle and showed how the brake controller worked and adjusted. He then had me drive and get a feel for towing the trailer. We then went back to the dealership and he had me practice backing up on to one of the pads, unhooking, etc.
It was time well spent and very educational for a newbie.
I feel that having the opportunity to 'field test' the trailer while still at the dealership saved both of us time and the hassle and expense of hauling back and forth.
IMHO:
Make sure there are metal valve stems in the wheels/tires.
I don't know if CCD's come with spares, but with a single-axle get one!
Have the dealer show you how to lower & raise the awning, then you do it yourself while being watched...that's what worked for me, but I didn't figure that out until after our 1st trip!
They will go through a check list with you for all the systems.
It has been my experience that A/S will stand behind the trailer for most anything afterwards, 2 yr warranty. We've had some minor 'stuff' but have always been satisfied with their response. (The selling dealer, another dealer, & J.C. itself) I still would do a complete exterior inspection for any scratches, dings, etc. including the wrap on the bottom. Any, even minor, physical damage after you leave the lot can turn into an arduous battle.
Most of all prepare to be even more excited than you are now....ENJOY, after 9 months we're still thrilled with our newbee .
Kevin---The other posts have pretty well covered everything except physical damage. These items ARE NOT COVERED BY WARRANTY !!! If you get home and find dents, scratches, under body damage , etc you've bought it ! Look it over carefully bottom top and inside. If there is something that can't be repaired at delivery be sure to have the dealer note and sign it on the contract. Even with close inspection you'll likly have a few little things that need attention after you use it a time or two. Airstream is good about taking care of anything that's warrantable. Shipping or lot damage is the dealers responsibilty.----Pieman
"It doesn't cost anymore to go first class, you just can't stay as long"
I have had some trouble with rubber window gaskets not being glued strong enough around the curves. I'm not sure if it is a lack of adhesive or just one of those things that will always happen.
Just open the windows and make sure the gaskets are glued well.
We are on our way to the dealership for the walk through on our new Bambi CCD. I can hardly sit still. Thanks so much for all your information. I knew if I looked, you'd have answers to my questions. I've printed some of these pages to read on our way over to the dealership!!
We just got back from the dealership with our Bambi after almost 6 hours. Just as we signed the paperwork and thought we were about to leave, the tech came up with the trailer and truck. He said there was a problem with the brake system. After a couple of hours more, they determined that apparently the brake wires had been pinched during installation. They made a temp fix and allowed us to leave today but we have to return to the dealership next week so they can remove the bottom of the trailer and repair the brake wire. My questions are:
1. It looked like they drilled into the underside of the trailer - isn't the fact that the bottom of the trailer is enclosed suppose to be one of the quality factors of an A/S? Did they harm the trailer by drilling holes in the underside?
2. After they remove the underside to repair, will it damage the quality of the trailer?
Welcome to the forum! Sorry I missed your earlier posts.
While removing and reinstalling the underside of the trailer seems to be a big deal it is designed to be done. The stuff that is over the bottom sheet will need service. So it has to be removed depending on the task. The hole, if they drilled it is not a big deal either. There are many holes in the underside, there has to be to allow moisture that enters the belly pan to get out. Otherwise you would have a moldy mess.
If you unit is goable please feel free to join us at blue springs rally next weekend. We are having a forum rally their and would love to meet you and your new trailer. Blue springs rally
__________________ Brett G WBCCI #5501 AIR # 49
Wise men talk because they have something to say; fools, because they have to say something. -- Plato
Logic is the one way you can go wrong with confidence - Charles E. Kettering
Thank you so much for your info. We were in a panic about buying a new trailer and it needing so much repair before we got it off the lot.
We went out to Ft. Desoto the day after picking it up for our first camping expereince in our adult lives. We had a wonderful time and fell completely head over heels in love with our Bambi. We were the only A/S in the park but did see a little silver tear drop pulled by a little silver vw bug. Later today we are taking the Bambi back to the dealership for the needed repairs.
We'd love to meet you all at Blue Springs but have to make a quick trip to Louisville, KY to close on a house. Darn it! Not sure the Bambi would be out of the hospital by then anyway. The dealership has been swamped with getting trailers ready for FEMA for hurricane victims.
Quick Links
The Fun has Just Begun! 
I'll owe on the trailer for a good few years, I'll owe my wife much more!! 
Too bad... I want to take her out on a maiden voyage so badly!!
Linear Mode
