I have some questionable work on my trailer done by the previous owner. I'm hoping you can set me straight.
1. The regulator bracket is currently a block of wood. What's the correct bracket?
2. Does this setup look right? The pole seems very flimsy with only a screw/nut holding it at the bottom.
The regulator originally mounted on a cast aluminum extension of the part that holds the tanks down in your photo. Apparently it is broken off and the PO put an L shelf bracket and wood piece to replace it (as best I can see from the photo).
I am not sure that the original cast aluminum tank parts are still available, so you may have to make a better solution than the wood part, maybe out of a fabricated aluminum piece which fits under the hold down bracket and attaches to it in some way. Of course if you can locate the original part, it would be a better solution.
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.