Just got done removing my Saburban Furnace for cleaning. It had been intermitant in ignition. Still couldn't figure out how to take the heating element out of the chasis. While I was on my knees, I noticed a set of wires coming out of the wall below the oven that were not used. They had just been taped off and back. They appear to be 30 AWG and are (1) orange, (1)white. Two wires. They come through the wall where the wiring for the furnace comes through. Is there anyone out there that can tell me what they were intended for?
Do you have the switch for the outside light over the door? Seems like that wiring comes in there. The switch is mounted on the end of the galley cabinet, just next to the door.
Just took a minute to look at the stove. It is a Magic Chef Mod: BT18LA-4. Unfortunately I do not see a light. Could this model not have come with a light?
The OEM Magic Chef had a red push button switch that was for the light. It was with all the other knobs. It could be that the stove was replaced at some point in the coach's life so far, but the new one has no light. Do the wires have 12 VDC on them?
__________________
Brett G
WBCCI #5501 AIR # 49
"Stop worrying about the potholes in the road and celebrate the journey." -- Fitzhugh Mullan
Wise men talk because they have someting to say; fools, because they have to say something. -- Plato
In politics, absurdity is not a handicap— Napoleon
Fallman, the power and ground for our 12 volt propane gas detector pass that way, and the detector is at the bottom of the bulkhead on the left as you enter the trailer door. Nick.
__________________
Nick Crowhurst, Excella 25 1988, Dodge Ram 2500 Cummins Diesel. England in summer, USA in winter.
"The price of freedom is eternal maintenance."
Just got done removing my Saburban Furnace for cleaning. It had been intermitant in ignition. Still couldn't figure out how to take the heating element out of the chasis. While I was on my knees, I noticed a set of wires coming out of the wall below the oven that were not used. They had just been taped off and back. They appear to be 30 AWG and are (1) orange, (1)white. Two wires. They come through the wall where the wiring for the furnace comes through. Is there anyone out there that can tell me what they were intended for?
If you want a wiring diagram for your airstreem i have it. My 85 is same as your unit. Just e mail me at gmby@netptc.net and I will make a copy from my owners manual. Please let me have your home address so I can mail it.
Regards Rusell