Assuming yours is like my 2013....in the control cupboard, above the generator control is a panel with two switches, one has a lightning bolt which is for the electric element, the other switch has a flame symbol for gas. If you are hooked to power, just turn on the electric switch.
Otherwise turn on the gas switch. You will see the lamp glow red....pre-light phase, go off, lighting....if it comes back on you may need to turn it off for a few seconds and try again. When the flame is on you will be able to hear it.
Hope this helps. I type slow so if this isn't enough, I bet you can find a good video on you-tube,
Mike
|