|
|
09-13-2016, 10:34 AM
|
#221
|
2 Rivet Member
1968 26' Overlander
Wolfforth
, Texas
Join Date: Apr 2014
Posts: 23
|
convertor?
Where did you buy the all in one convertor/AC/DC panel? I'm starting on the electrical rewiring and wow what a headache it is giving me!
|
|
|
09-13-2016, 09:11 PM
|
#222
|
3 Rivet Member
1954 26' Romany Cruiser
jefferson
, Oregon
Join Date: Nov 2015
Posts: 193
|
1954 cruiser under shell
bought it from Vintage trailer supply along with just about everything.
|
|
|
09-13-2016, 09:17 PM
|
#223
|
3 Rivet Member
1954 26' Romany Cruiser
jefferson
, Oregon
Join Date: Nov 2015
Posts: 193
|
wiring
I hear you....I ran my wires several time before coming up with a good plan. Tough part was not exactly knowing where I was putting everything. I drilled out a lot of holes and used a lot of grommets. I ended up with 4 AC circuits and half a dozen DC circuits. AC circuits....Curbside outlets, Streetside outlets...microwave and Air Conditioning. big problem Im having is with the 1.5 inch shallow boxes. Can get a normal outlet in them with 12/2 romex. Especially if their daizy chained.
|
|
|
09-14-2016, 10:43 AM
|
#224
|
3 Rivet Member
1954 26' Romany Cruiser
jefferson
, Oregon
Join Date: Nov 2015
Posts: 193
|
1954 Cruiser
picts of finished floor in my Cruiser. 5/8 all wood natural bamboo. Used 4 boxes at 50lbs a box. Not too much weight
|
|
|
09-22-2016, 09:27 AM
|
#225
|
3 Rivet Member
1954 26' Romany Cruiser
jefferson
, Oregon
Join Date: Nov 2015
Posts: 193
|
54 cruiser
Anybody have insight on Refrigerators? Im thinking under counter AC/DC. No hole in the side and only 3amp draw. Down side is small size at 3.1cuft. Curious if anybody has had success with these refrigerators.
|
|
|
09-26-2016, 03:59 PM
|
#226
|
Rivet Master
1960 33' Custom
Athens
, Georgia
Join Date: Jun 2005
Posts: 1,373
|
I used an isotherm on my previous trailer and it was excellent. Quiet cool and well made
__________________
1960 Sovereign 33' Pacific Railroad Custom
|
|
|
10-20-2016, 01:18 PM
|
#227
|
3 Rivet Member
1954 26' Romany Cruiser
jefferson
, Oregon
Join Date: Nov 2015
Posts: 193
|
RV Fridge for 54 cruiser
Curious what size isotherm you were using. What about 2 ways. Any insight on those?
|
|
|
10-20-2016, 01:27 PM
|
#228
|
3 Rivet Member
1954 26' Romany Cruiser
jefferson
, Oregon
Join Date: Nov 2015
Posts: 193
|
1954 cruiser
getting the cabinets in. Just finished the upper cabinets. hooked up my recessed puck lights. dimmer only works on 3 out of the 4 lights. Still have to figure that one out. Came out alright.
|
|
|
10-20-2016, 03:47 PM
|
#229
|
3 Rivet Member
1954 26' Romany Cruiser
jefferson
, Oregon
Join Date: Nov 2015
Posts: 193
|
photos of 54
cabinets
|
|
|
10-20-2016, 04:18 PM
|
#231
|
3 Rivet Member
1954 26' Romany Cruiser
jefferson
, Oregon
Join Date: Nov 2015
Posts: 193
|
electrical 54 cruiser
here are a few picts of my electrical setup. bit of a rats nest but I know where everything goes. Thats the key
|
|
|
10-20-2016, 04:27 PM
|
#232
|
3 Rivet Member
1954 26' Romany Cruiser
jefferson
, Oregon
Join Date: Nov 2015
Posts: 193
|
shower pan 54 airstream
picts of the shower/head. Also the precision temp on demand water heater vented through the floor
|
|
|
10-20-2016, 07:04 PM
|
#233
|
2 Rivet Member
1954 25' Cruiser
Bern - Thun
, Berner Oberland
Join Date: Aug 2014
Posts: 87
|
"Invalid Attachment" ..... (Cabinets)
|
|
|
10-20-2016, 07:57 PM
|
#234
|
Rivet Master
1960 33' Custom
Athens
, Georgia
Join Date: Jun 2005
Posts: 1,373
|
Sorry. I can't remember the model of isotherm, maybe a 65? It was an under counter fridge with freezee
__________________
1960 Sovereign 33' Pacific Railroad Custom
|
|
|
10-24-2016, 09:24 PM
|
#235
|
3 Rivet Member
1954 26' Romany Cruiser
jefferson
, Oregon
Join Date: Nov 2015
Posts: 193
|
1954 cruiser
Ordered a Isotherm 130 AC/DC fridge. 5amp/hr, 4.6 cubic feet, under cabinet size. West Marine for $1050. Also more lights, a sheet of medium density foam for Foamforu.
|
|
|
10-25-2016, 04:31 AM
|
#236
|
Rivet Master
1955 22' Safari
Currently Looking...
Great Lake State
, .
Join Date: Nov 2005
Posts: 1,480
|
looking good........great job........toastie
|
|
|
10-25-2016, 06:58 AM
|
#237
|
4 Rivet Member
1956 22' Flying Cloud
Dallas
, Texas
Join Date: Jan 2008
Posts: 368
|
Quote:
Originally Posted by Stanley29
|
None of the attachments is available. Could you repost, please?
Thanks
Hank
__________________
See my 1956 Flying Cloud renovation thread.
|
|
|
10-27-2016, 09:54 AM
|
#238
|
New Member
1971 27' Overlander
jefferson
, Oregon
Join Date: Apr 2015
Posts: 3
|
54 cruiser
I'm on the road at the moment will post Picts next week.
Just received the Isotherm 130 AC/DC fridge. Looks nice. We'll see how it works out.
Need to tackle the shower/pan /head when I get home. Also run gas lines. Not sure on the best pipe/tubing to use. Any suggestions?
|
|
|
10-27-2016, 09:58 AM
|
#239
|
New Member
1971 27' Overlander
jefferson
, Oregon
Join Date: Apr 2015
Posts: 3
|
cruiser
Quote:
Originally Posted by toastie
looking good........great job........toastie
|
Thanks,
Only 2.5 weeks till we hit the road for TX. No pressure. Ha
|
|
|
10-30-2016, 05:46 PM
|
#240
|
3 Rivet Member
1954 26' Romany Cruiser
jefferson
, Oregon
Join Date: Nov 2015
Posts: 193
|
1954 cruiser
Just got back to town. Time to get busy with the cruiser. Only 2 weeks to go
|
|
|
|
|
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|