If you mean the light over the front door, I think you need to remove the screw holding the assembly, located at the top, unless, like mine, there is no plexiglass lens, then the access is thru the front.
Thanks Rogerdoger. Yeah its the front door. I climbed up and took a closer look and it appears that you are right, looks like I'll have to take out those two small screws. We'll see what happens after that. Thanks again.
The little steel screws will most likely be rusted/corroded into the cast Al light cover. Another stupid design error, but one we have to live with. Best of luck removing them.
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.