Furnace out-need help before we leave

[Dan S]

Got propane, turn up the thermo but but nothing happens, no click....nothing

Any ideas. We wanted to head out today in about 5 hours

Thanks

Dan

[Dan S]

Forgot to mention:

It's a Duo-Therm model 90125.001

The only adjustment or control i see after i remove the panel Is a burner air adjustment screw visible, can that in anyway help.

[DKB_SATX]

You could always head this direction... spend a few days in Texas right now and you'd be contemplating removing the furnace for extra storage space.

[Dan S]

It will be in the 40's in the mountains just out of Seattle this weekend

[thecatsandi]

Originally Posted by Dan S

Got propane, turn up the thermo but but nothing happens, no click....nothing

Any ideas. We wanted to head out today in about 5 hours

Thanks

Dan

There should be two wire running to the Furnace. Blue in color normally. Short them together and see if the fan runs. If the thermostat is old. It has a mercury switch with small wires. They could have broken.
You should also have a fuse inside the furnace accessable from the outside.

[TG Twinkie]

Is this the original furnace? If so you need to set the thermostat all the way to the left and light the pilot.
If you have done that; does the pilot stay lit?
Make sure you have 12 volts DC to the furnace.
If not; check the fuses.
Does the blower run when you set the thermostat to max? Even when there is no flame?