Well finally started to break down trailer.

[Mrcrowley]

It is not like I had choice , I put new deep cycle group 24 deep cycle batterys in hooked them up and the univolt work great no issues with voltage or amps. I even pull out the vent fan above stove oiled her up and she ran great the vent in bathroom ran to. All electric ran great now is the problem I hooked up out side water and found a split copper line which must have froze from sitting for like 10 years. (right under the tub running along outside of wall around corner) . Good thing is I have to take cabintry out of bathroom to repaint so Ill have great access to the pipe .

Here is the question what kind of copper do I use from what I see it has to be pretty flexable ?

I have done some copper piping with solder and flux and all that so that wont be a issue.

Oh and not to be a pain so I dont have to search a ton of threed what kind of paint should i use on plastic bathroom counters?

Thanks
Mrcrowley